ICT CIE 0417
How to use this notebook
Go chapter by chapter. Yellow boxes are key terms β learn the full definition, not just the word, because CIE examiners give marks for detail, not for repeating the word back. Green boxes are exam tips. Tick the recap checklist at the end of each chapter before moving on.
Types & Components of Computer Systems
Hardware, the CPU, signals, software types, memory, storage overview, OS interfaces, computer categories and emerging tech.
1.1 Hardware
Internal hardware lives inside the system unit:
External hardware (peripherals): Input devices (mouse, keyboard, microphone, scanner, webcam) enter data; output devices (speaker, monitor, printer, projector, actuator) present processed data to the user.
1.2 CPU Components
- ALU (Arithmetic Logic Unit) β performs arithmetic calculations (add, subtract) and logical decisions (AND, OR, comparisons).
- CU (Control Unit) β coordinates and manages the flow of data and the execution of instructions across the processor and the system.
1.3 Signals & Data Conversion
Computers only understand digital data (0s and 1s). Real-world data from sensors or microphones is analogue, so it must be converted.
1.4 Software Types
Application software
Provides the services a user needs for a specific task: word processing, spreadsheets, database management (DBMS), control & measurement software, apps/applets, video editing, graphics editing (bitmap vs vector), audio editing, and CAD (Computer-Aided Design) for precise 2D/3D models and cost estimation.
System software
Manages the hardware and provides the platform application software runs on:
1.5 Primary Memory
- RAM β temporary, volatile memory (loses data when powered off); holds the running apps, OS components and data in active use.
- ROM β permanent, non-volatile memory (keeps data with no power); stores the BIOS and the bootstrap loader (start-up instructions).
1.6 Storage Technologies Overview
- Magnetic β magnetised platters or tape (HDD, magnetic tape).
- Solid state β flash memory chips (NAND), no moving parts (SSD, USB, SD cards).
- Optical β a laser reads/writes pits and lands on a reflective disc (CD, DVD, Blu-ray).
- Cloud β files stored on remote internet servers across public, private or hybrid environments.
1.7 Operating System User Interfaces learn advantages AND disadvantages
| Interface | Advantages | Disadvantages |
|---|---|---|
| CLI (Command Line) | Direct control; not limited to fixed options; can change low-level settings; fast, low memory use | Commands must be memorised; slow, error-prone typing; needs exact spelling/syntax |
| GUI (Graphical) | No commands to remember; user-friendly WIMP (Windows, Icons, Menus, Pointer); simple mouse/touchpad control | Uses much more RAM than CLI; limited to the options shown on screen; needs a complex, slower OS |
| Dialogue-based (voice) | Hands-free; very accessible for physical disabilities; can work as a biometric security feature | Unreliable with noise/accents; complex setup; user must know the exact recognised keywords |
| Gesture-based | No physical device needed; very natural; no training required | Accidental movements can trigger actions; short sensor range (~1.5 m); limited pre-set gestures |
1.8 Computer Categories & Processing
Categories: Desktop/All-in-One, Mobile computers (laptop, tablet, smartphone, smartwatch), Embedded computer (built into appliances like a washing machine), Server, Mainframe (bulk financial transactions), Supercomputer (scientific calculations), Minicomputer, Microcomputer, AI computers, and Quantum computers.
Binary vs Quantum: traditional microcomputers process bits as either 0 or 1. Quantum computers use qubits, which use superposition to exist as 0, 1, or both at once β enabling far more complex calculations.
1.9 Emerging Technologies
- Artificial Intelligence (AI) β systems that simulate human intelligence: natural language processing (translation, voice assistants), smartphone facial recognition and predictive text, and autonomous vehicles that navigate and react in real time.
- Immersive tech β Augmented Reality (AR) overlays digital content on the real world (e.g. navigation heads-up display); Virtual Reality (VR) fully immerses the user in a generated 3D world using a headset; Mixed Reality (MR) blends real and virtual objects that interact in real time.
Exam tip
If asked to "describe" a difference (e.g. RAM vs ROM, or CLI vs GUI), always give a point for each side β one mark for RAM being volatile/temporary, another for ROM being non-volatile/permanent. Don't just name them.
Extended notes β Chapter 1 in full detail(tables, advantages/disadvantages, worked examples)
1.1 Hardware and software
Hardware = the physical components of a computer system. External: keyboard, mouse, monitor, printer, camera. Internal: motherboard, CPU, RAM, ROM, graphics card, sound card, NIC, HDD/SSD.
| Internal component | Key exam points |
|---|---|
| Motherboard | Printed circuit board; lets the processor and other hardware communicate; acts as a hub with sockets and slots |
| CPU / processor | Executes program instructions. ALU = arithmetic and logic operations; CU = fetches, decodes and executes instructions; also holds registers |
| RAM | Temporary storage for data/programs/part of OS in use; read and write; volatile |
| ROM | Permanent storage (e.g. BIOS/boot file); read only; non-volatile |
| Graphics card | Sends images to a monitor/projector; has a processing unit, memory, cooling (heat sink) |
| Sound card | Produces sound through speakers; records sound from a microphone |
| NIC | Connects a device to a network (wired or wireless); has a unique MAC address |
| HDD / SSD | Permanent internal storage for files, OS and applications. HDD = magnetic; SSD = solid-state |
Software = programs that control the computer and process data.
| Applications software (does user tasks) | System software (runs the hardware / platform for other software) |
|---|---|
| Word processing, spreadsheet, database, CAD, video/audio/graphics editing, control and measurement software, apps and applets | Operating system, compiler, linker, device drivers, utilities (antivirus, backup, disk repair, defragmenter, file management) |
- Compiler: translates a whole high-level language program (source code) into machine code (object code); compiled code can be re-run without recompiling.
- Linker: combines object files/modules from a compiler into one runnable program.
- Device driver: lets the OS communicate with a hardware device (e.g. printer); without it the device will not work.
- Database: table = rows (records) and columns (fields). Spreadsheet: cells identified by column letter and row number (e.g. B6).
- App: does a fairly substantial task (banking, streaming). Applet: small program for a single task, usually embedded in a web page and run in the browser.
- Analogue data changes smoothly (infinite values); digital data is discrete binary (0/1). Analogue to computer needs an ADC; computer to a device (motor, speaker) needs a DAC.
1.2 Main components
RAM vs ROM
| RAM | ROM |
|---|---|
| Temporary, volatile | Permanent, non-volatile |
| Can be written to and read from | Read only, contents cannot be altered |
| Stores data, files, programs and part of the OS currently in use | Stores the BIOS and other start-up data |
| More RAM can make the computer faster | — |
BIOS: on start-up it checks that all hardware is present and working, then loads the OS into RAM. Date, time and configuration are kept in battery-powered non-volatile CMOS.
Input vs output devices: input devices enter data/instructions (manual: keyboard, mouse; direct data entry: sensors, OCR). Output devices present results in human-readable form or control another device (monitor, printer, speaker). Output devices are under the computer's control. Devices that do both: touch screen, DVD writer/player.
Internal memory vs backing storage
| Internal memory (RAM/ROM) | Backing storage (HDD/SSD) | |
|---|---|---|
| Contents when power off | RAM lost; ROM kept | Kept |
| Capacity | Smaller | Much larger |
| Access speed | Very fast | Slower |
| Cost per byte | Higher | Lower |
| Read directly by CPU? | Yes | No β data must first be moved into RAM (not directly addressable) |
| Fixed / removable | Fixed inside computer | Fixed or removable (external HDD/SSD, Blu-ray) |
Removable backing storage is used for backups in case data is lost or corrupted.
1.3 Operating systems
Tasks of an OS: control input/output/backing storage; load, run and store programs; handle errors; maintain security (user accounts, passwords); keep a computer log; provide a user interface.
| Interface | Description | Typical users/uses |
|---|---|---|
| CLI (command line) | User types commands | Programmers, analysts, technicians |
| GUI (WIMP: windows, icons, menus, pointing device) | Icons/pictures selected with a pointer or touch | General end-users |
| Dialogue-based | Spoken commands (Siri, Alexa, in-car voice control) | Cars, homes, people with disabilities |
| Gesture-based | Hand/head/foot movements picked up by camera/sensor | Cars (volume, boot, windows) |
| Advantages | Disadvantages | |
|---|---|---|
| CLI | Direct communication with the computer; not limited to preset options; can change configuration settings | Must learn many commands; slow to type; easy to make errors; exact format/spelling needed |
| GUI | No commands to learn; user-friendly; click an icon | Uses much more memory; limited to icons shown; needs a more complex, slower OS |
| Dialogue | Hands-free (safer while driving); helps disabled users; can be used for security (voice recognition) | Unreliable/needs repeating (background noise); complex to set up; user must know valid commands |
| Gesture | No mechanical device or contact needed; natural; no training | Unintended movements picked up; only works near camera/sensor (about 1.5 m); limited number of recognised movements |
1.4 Types of computer
| Desktop | Laptop | |
|---|---|---|
| Advantages | Standard parts, cheaper; easier and cheaper to upgrade; better specification for the price; power use/heat less critical; less likely to be stolen or damaged; more stable wired connection | Portable; one unit, few wires; small footprint; makes full use of Wi-Fi |
| Disadvantages | Not portable; many cables and clutter; files must be copied to work elsewhere | Easier to steal; limited battery life; keyboard/pointing device less comfortable; often cannot be upgraded (e.g. RAM) |
Mobile computers: laptop, smartphone, tablet, phablet.
| Smartphone | Phablet | Tablet |
|---|---|---|
| up to 5.1 inch (13 cm) | 5.1β7 inch (13β18 cm) | over 7 inch (over 18 cm) |
- Smartphone: OS + apps; Wi-Fi/3G/4G/5G; Bluetooth; cameras; flash memory and cloud sync; sensors (proximity blocks accidental touches; accelerometer detects movement/orientation); OLED touch screens. Advantages: small and light, connects anywhere, sensor-based apps (maps). Disadvantages: small screen/keyboard, slow typing, battery drains quickly, easily lost/stolen, mobile data slower than Wi-Fi.
- Tablet vs laptop: tablet switches on quickly, longer battery, little heat, touch screen means no separate input device, but expensive, limited storage, slower typing, transferring files via an app store, fewer file formats/software than a laptop.
1.5 Emerging technologies
Artificial intelligence (AI): a machine/application doing tasks that need some intelligence (language, face recognition, driving, predicting outcomes such as weather).
- Positive: improved safety and quality; robots do dangerous tasks (bomb disposal, nuclear areas); help for disabled people; driverless vehicles.
- Negative: job losses (drivers, manufacturing); dependency on technology; loss of skills.
Extended reality (XR) = umbrella term for AR, VR and MR.
| Augmented reality (AR) | Virtual reality (VR) | |
|---|---|---|
| Idea | Digital objects overlaid on the real world | User fully immersed in a simulated digital world |
| Device | Smartphone/phablet screen or goggles | VR headset / head-mounted display (360Β° view) |
| Key difference | User still sees and interacts with the real world | User is cut off from the real world |
| Examples | PokΓ©mon GO; trying make-up or a car virtually; 3D CT scans for surgeons | Training (surgery, military), education, heritage, engineering designs, games, sport |
Exam tips
RAM/ROM tick-box questions are common; for "compare CLI and GUI" discuss both interfaces; for "why are computers still needed" link smartphone limitations (small screen, storage, typing) to laptop/desktop strengths.
Quick recap β Chapter 1
- Name 3 internal and 3 external hardware devices
- Explain the job of the ALU and the CU
- Describe the ADC β CPU β DAC signal path
- List 3 application software types and 3 system software types
- Compare RAM and ROM
- Give one advantage and one disadvantage of CLI and GUI
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- ALU: Executes all mathematical calculations (addition, subtraction) and logical decisions / comparisons (AND, OR, NOT).
- CU: Directs and coordinates data flow and operations across the CPU; fetches, decodes, and manages the execution of instructions.
View Markscheme Points
- RAM is volatile memory / loses contents when power is turned off; ROM is non-volatile / retains contents permanently without power.
- RAM is read and write memory / allows modifications; ROM is read-only memory / cannot be altered by normal user operations.
- RAM holds currently executing programs, active data, and loaded OS parts; ROM stores bootstrap instructions / BIOS / start-up routines.
View Markscheme Points
- Sensors capture continuous, analogue physical measurements from the environment.
- Microprocessors/computers only process discrete, digital electrical signals (binary 0s and 1s).
- The ADC translates physical analogue data into binary values the CPU can interpret.
View Markscheme Points
- CLI Advantage: Requires far less RAM and processing power; allows rapid, direct command execution by experienced users; commands can be scripted.
- CLI Disadvantage: Complex commands and strict syntax must be memorised; intolerant of typing errors.
- GUI Advantage: Intuitive and user-friendly WIMP layout; visual icons require no prior technical command memorisation.
- GUI Disadvantage: Uses significantly more memory and system resources; limited strictly to on-screen pre-set actions.
View Markscheme Points
- Definition: A dedicated microprocessor system built permanently into a larger mechanical/electronic device to perform a specific dedicated control task.
- Examples (any two): Washing machine, microwave oven, dishwasher, modern car engine management, smart thermostat.
View Markscheme Points
- Disk Defragmenter: Reorganises fragmented file clusters contiguously across magnetic storage blocks to improve read/write access speeds.
- Antivirus software: Scans, quarantines, and cleans/deletes malicious files using updated signature databases.
- Backup software: Creates duplicated archive copies of files to external or cloud drives for disaster recovery.
View Markscheme Points
- A compiler translates the entire high-level source code into a standalone machine-code executable file at once; an interpreter translates and executes source code line-by-line.
- Compiled programs run faster once built and do not require original source code; interpreted programs halt immediately when an error is encountered, facilitating rapid debugging.
View Markscheme Points
- Mainframes can process massive volumes of concurrent input/output transactions in real time (high throughput).
- Mainframes provide fault-tolerant redundant hardware ensuring zero-downtime 24/7 reliability.
View Markscheme Points
- Head-Mounted Display (HMD) / VR Headset with dual micro-displays and motion tracking sensors.
- Haptic feedback data gloves / sensor-equipped hand controllers.
View Markscheme Points
- Traditional bits can only represent one state at a time (either a 0 or a 1).
- Qubits exploit the quantum phenomenon of superposition, existing as 0, 1, or both simultaneously, enabling parallel computing of massive mathematical datasets.
Chapter 2 β Input & Output Devices
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Input & Output Devices
Manual input, sensors, direct data entry, cards, barcodes/QR codes, and every output device you need for the exam.
2.1 Manual Input Devices & Sensors
- Keyboard β fast for skilled typists but slower than direct data entry and prone to typing errors.
- Numeric keypad β used at ATMs and POS terminals for fast numeric/PIN entry.
- Pointing devices β mouse, touchpad, tracker ball, joystick, driving wheel; control the on-screen cursor.
- Scanner β converts paper documents into digital form, often using OCR (Optical Character Recognition) to turn a scanned image of text into editable text.
- Digital camera and microphone β capture images and analogue sound respectively.
Key term, in full
Sensor β a device that measures a physical property (temperature, pressure, light, sound, moisture, pH) in the real world. The processing loop is: Sensor (analogue) β ADC β microprocessor compares the reading with preset parameters β DAC β actuator/motor/alarm reacts.
2.2 Direct Data Entry, Cards & Barcodes
| Feature | Barcode (1D) | QR Code (2D) |
|---|---|---|
| Data direction | Horizontal only | Horizontal and vertical matrix |
| Storage capacity | Low β numeric codes only | High β URLs, text, media, contact details |
| Scanning method | Laser scanner, needs direct alignment | Smartphone camera or scanner, any angle |
2.3 Output Devices, Displays, Printers & Projectors
Displays: CRT (heavy, legacy, hot); LCD (flat panel, CCFL backlight); LED (LCD backlit by LEDs β brighter, thinner, more efficient); OLED (self-emissive pixels, true blacks, flexible); IPS (wide viewing angles, accurate colour).
Printers: Laser (fast, dry toner, crisp text for offices); Inkjet (liquid ink droplets, great for photos, cheaper but slower and can smudge when wet); 3D printer (builds solid objects layer-by-layer from a CAD model); Dot-matrix (impact printer, noisy, used for continuous or multi-part carbon-copy paper).
3D printing in medicine
3D printing starts with a CAD model. Applications include custom prosthetic limbs (faster and cheaper than traditional manufacturing), bioprinted tissue to repair damaged organs and reduce transplant waiting lists, and biodegradable artificial blood vessels used in surgery.
Projectors: DLP uses tiny micro-mirrors for high contrast and portability; LCD projectors use three glass panels (red, green, blue) for bright, colour-accurate images.
Extended notes β Chapter 2 in full detail(tables, advantages/disadvantages, worked examples)
2.1 Input devices and their uses
Keyboard: pressing a key makes contact between conductive layers; the CPU uses an index file to identify the character. Uses: entering text/numbers/commands. Advantages: fast text entry, well known, easy verification against the source document. Disadvantages: hard for people with limited wrist/arm movement, slower than direct data entry, uses desk space.
Numeric keypad: numbers only. Uses: ATMs (PIN), mobile phones, POS terminals (manual barcode entry), chip and PIN devices, spreadsheets. Adv: fast numeric entry; small/portable. Disadv: small keys; number order may not be intuitive.
Pointing devices
| Device | How it works / uses | Advantages | Disadvantages |
|---|---|---|---|
| Mouse (optical, wireless) | Moves a pointer; select, drag, scroll, open/close windows, edit images | Faster than a keyboard for choosing options; quick navigation; less desk space than a keyboard; optical has no moving parts and does not clog with dirt | Hard for people with limited hand/wrist movement; needs a flat surface; older mice get dirty/damaged |
| Touchpad (laptops) | Finger movement moves the pointer, tap = click | Built in so no separate mouse; good for portability | Harder to control than a mouse; hard for drag and drop |
| Trackerball | Rotate a ball to move the pointer; used in control rooms, luxury cars, for people with RSI | Needs little fine control; easier for wrist problems; accurate; robust; less desk space | Not standard so costlier; user may need training |
| Remote control | Infrared signals; TVs, DVD/Hi-Fi, industrial machines | Works from a distance (useful in hazardous processes) | Difficult with limited hand movement; signal can be blocked |
| Joystick | Stick controls pointer; games and simulators | Easier than a keyboard to navigate; realistic control | Harder to control the pointer than a mouse |
| Driving wheel | Steering wheel + pedals (USB); racing games, driving simulators | More natural and realistic steering | Expensive; too sensitive; usually no feedback |
Touch screen (input): touch a button/icon to select. Uses: self-service tills, ATMs, POS terminals, information kiosks, phones/tablets, interactive whiteboards, computer-based training. Adv: fast, easy, no training. Disadv: limited options, arm strain/RSI, gets dirty (spreads infection, hard to read in sunlight).
Scanner: converts hard copy into digital images (flatbed is common); with OCR gives editable text. Uses: scanning documents, archiving old documents, photographs, barcodes. Adv: images stored for later editing; OCR is faster and more accurate than retyping; damaged photos can be recovered. Disadv: quality limited by resolution; slow at high resolution/colour.
Digital camera: images stored on memory cards; transferred by card reader, USB or wireless (Wi-Fi/Bluetooth). Uses: photography, reversing aids in cars, dentistry, virtual tours. Adv: better quality than traditional film; no film development (saves money, environmentally friendlier); thousands of photos per card; fast upload. Disadv: need computer skills; software correction loses some artistry; images may need compressing (large files).
Microphone: sound waves vibrate a diaphragm, moving a coil in a magnetic field to create an analogue current; the sound card (ADC) digitises it. Uses: voice recognition, voice commands, video-conferencing/VoIP, presentations and sound effects, intruder alarms. Adv: faster than typing; real-time sound manipulation; hands-free control improves safety. Disadv: large sound files; voice recognition less accurate than typing (e.g. their/there).
Sensors: measure a continuously changing physical quantity (analogue), so an ADC is needed. Used in monitoring and control.
| Sensor | Applications |
|---|---|
| Temperature | Washing machines, central heating, automatic glasshouses, ovens |
| Pressure | Intruder alarms, washing machines, robotics, environmental monitoring |
| Light | Automatic glasshouses, automatic doors, intruder alarms, street lighting |
| Sound/acoustic | Intruder alarms, monitoring liquid/powder flow in pipes |
| Humidity/moisture | Glasshouses, environmental monitoring, factories needing controlled moisture |
Adv of sensors: more accurate than humans; continuous readings; immediate action/warning; automatic (good for hazardous processes). Disadv: faulty or dirty sensors give wrong readings; analogue signals need an ADC.
Light pen: senses light changes; works only with CRT monitors; used to select objects and draw (CAD). Adv: more accurate than touch screens; small; easy to use. Disadv: lag when drawing; CRT only; dated.
2.2 Direct data entry (DDE) devices
DDE inputs data with little or no human interaction (so fewer errors, faster).
| Device | How it works / uses | Advantages | Disadvantages |
|---|---|---|---|
| Magnetic stripe reader | Reads account number, sort code, expiry from the stripe on cards; ATMs, EFTPOS, door/hotel security | Fast; error-free; secure (not human readable); robust, no moving parts; not affected by moisture | Data lost if the stripe is damaged/exposed to magnetic fields; needs close contact; not human readable |
| Contactless card reader | Chip emits radio waves; card held a few cm from terminal (NFC/RFID); no PIN under a set limit | Faster (about 10 s vs 30 s); encrypted (128-bit) and a one-time transaction number; no PIN typing errors | More expensive cards; could be monitored by a thief with a reader; may charge twice; low transaction limit; may be charged without owner noticing |
| Chip and PIN reader | Card chip read at EFTPOS terminal; PIN entered on keypad; no radio frequency | More secure than contactless (PIN must match chip); more robust than magnetic stripe | PIN can be observed (fraud) |
| RFID reader | Radio waves read a tag (microchip + antenna; passive or battery powered); livestock tracking, retail, theme-park passes, libraries | No line of sight needed; can read from a distance; robust; very fast (under 100 ms); reads many tags at once; read/write | Tag collision; radio signals can be jammed or hacked; more expensive than barcodes |
| OMR (optical mark recognition) | Reads pen/pencil marks in set positions compared with a stored template; multiple-choice exams, questionnaires, voting papers | Very fast; no typing so accurate; more accurate than OCR | Forms must be carefully designed; wrongly filled forms need manual checking (slow, costly) |
| OCR (optical character recognition) | Converts printed/handwritten text on paper into editable text; passports/ID cards, ANPR (number plates), digitising newspapers/books | Faster than keying in; fewer errors | Struggles with some handwriting; still not very accurate |
| Barcode reader | Reads barcode (stock control, itemised billing, libraries, safety checks) | Faster than typing, fewer mistakes; automatic stock control; tried and trusted | Expensive to administer, barcodes can be swapped; easier to damage than RFID/magnetic stripes |
| QR code scanner | Matrix of dark/light squares read by a camera; holds far more data than a barcode (up to 4296 characters / 7089 digits vs about 30 digits) | Holds much more data; built-in error checking; read by phone camera (no laser scanner); easy to send; can be encrypted | Several QR formats; can carry malicious code (attagging) leading to fake websites/viruses |
OCR vs OMR: OCR reads handwriting so customers can write longer answers, but it needs a complex recognition system and can misread poor handwriting. OMR only detects marks in set positions, so answers are limited to the choices given, but it is simpler, faster and more accurate; ideal for multiple-choice.
QR code uses: advertising, links to websites/phone numbers, boarding passes, app downloads, Wi-Fi authentication, augmented reality, virtual online stores.
2.3 Output devices and their uses
Monitors
| CRT | LCD (TFT) with LED backlight | LED / OLED | |
|---|---|---|---|
| How it works | Electron gun fires at phosphor screen (red, green, blue dots) | Liquid crystals form pixels; needs backlighting (LED now; CCFL in older screens) | Each tiny LED is red, green or blue; brightness varied by current |
| Uses | CAD with light pens (rare now) | Most modern computers, phones, tablets, laptops, TVs | Large outdoor displays (very bright colours) |
| Advantages | Wide viewing angle; works with light pens; cheap | Low power; light; no burn-in; no flicker; sharp resolution; low electromagnetic field | Very bright, vivid colours |
| Disadvantages | Heavy, large footprint (about ten times an LCD), hot (fire risk), high power, flicker (headaches) | Inconsistent colour/contrast at angles; motion blur; weaker blacks; stuck pixels; uneven backlight | (Note: many "LED" TVs are really LCD screens with LED backlighting) |
LED backlight vs CCFL: LEDs reach full brightness instantly, give whiter/brighter light, allow thinner screens, last much longer, use less power and produce less heat.
Touch screen (output): shows options that depend on the previous input (ATMs, ticket machines, kiosks, phones). Adv/disadv as for touch-screen input; extra risk: easier for a third party to track interactions (security, e.g. card details).
Multimedia projector: projects computer/TV/DVD output onto a large screen. Uses: training, advertising, home cinema. Adv: many people can see the presentation; avoids crowding round or networking many computers. Disadv: fuzzy images, expensive, awkward set-up.
Printers
| Laser | Inkjet | Dot matrix | |
|---|---|---|---|
| Method | Charged drum, toner fused with heated rollers; needs a large buffer (whole page stored) | Print head sprays ink droplets (thermal bubble or piezoelectric); small buffer so prints a bit at a time | Impact printer: pins strike an inked ribbon |
| Uses | Fast, high-quality, high-volume; quiet offices | Low volume, high-quality single pages, photos | Noisy/dirty environments; multi-part (carbon copy) stationery; continuous paper; till receipts |
| Advantages | Fast for large jobs; high, consistent quality; long-lasting toner | Good quality; cheaper to buy; light and small; no ozone | Works in dirty/moist places; carbon copies; cheap to run; suits continuous stationery |
| Disadvantages | Colour is costly to run; produces ozone/VOCs (health hazard); not fast for few pages | Slow for many copies; cartridges run out; smudges; ink is expensive | Noisy; slow; poor quality; costs more to buy than inkjet |
(Graph) plotter: pen/pencil/marker draws continuous lines (vector drawings) on paper up to several metres wide; used with CAD/CAM (architectural and engineering drawings). Adv: very high quality, large and accurate; can draw on many materials. Disadv: very slow; expensive; large footprint; being replaced by wide-format inkjets.
3D printer: builds solid objects layer by layer (additive manufacturing, vs subtractive such as CNC carving); layers under 0.1 mm; direct (inkjet-based) and binder (powder then glue) methods; newer ones harden liquid polymers with lasers/UV. Process: design in CAD → prepare file for the printer → set up → print layer by layer → remove and finish/cure. Uses: prosthetic limbs, reconstructive surgery, aerospace parts, fashion/art, spare parts for old machines, prototypes. Adv: easy customised manufacture; rapid prototyping; same cost for small or mass production; medical benefits; spare parts on demand. Disadv: counterfeits/copyright infringement; dangerous items could be made; possible job losses.
Speakers: digital data → DAC (analogue current) → amplifier → loudspeaker (current in coil on iron core reacts with a permanent magnet, moving a cone to make sound). Uses: phones, presentations, playing sound files, screen readers for the visually impaired. Adv: loud enough for groups; good atmosphere; helps visually impaired; simple. Disadv: disturb others; good quality is expensive; take desk space.
Actuators: mechanical/electromechanical devices (relay, solenoid, motor) that let a computer control physical things (valves, conveyor belts, pumps, switches, buzzers). Digital output needs a DAC. Adv: remote operation (safety), inexpensive. Disadv: another part that can fail; need a DAC.
Exam tips
for "advantages and disadvantages" or "suitability" questions, match the device to the scenario (e.g. OMR for multiple-choice; dot matrix for carbon copies; laser for high-volume office; inkjet for photos). Always give a reason, not just the device name.
Quick recap β Chapter 2
- Give one advantage and one disadvantage of a keyboard vs direct data entry
- Explain the difference between OMR, OCR and MICR
- Compare a barcode and a QR code
- Compare a laser and an inkjet printer
- Describe the sensor β ADC β microprocessor β DAC β actuator loop
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- QR codes hold substantially greater data capacities (including alphabetic text, URLs, binary payloads) than single-line 1D barcodes.
- QR codes feature built-in Reed-Solomon error correction and can still be read even if partially stained or torn.
- QR codes can be scanned omnidirectionally from any angle without precise horizontal laser alignment.
View Markscheme Points
- Magnetic ink characters cannot be forged, altered, or duplicated with ordinary photocopiers.
- Characters remain machine-readable even if overwritten with pen ink, smudged, crumpled, or folded.
View Markscheme Points
- Temperature sensor continuously records analogue ambient readings.
- Analogue signals pass through an ADC which converts them into digital numbers.
- Microprocessor compares current reading against the pre-set parameter (24Β°C).
- If temperature < 24Β°C, microprocessor sends signal (via DAC) to activate heater actuator; if temperature >= 24Β°C, signal shuts heater off.
- Process repeats indefinitely in an automated closed control loop.
View Markscheme Points
- Laser printers produce pages per minute at significantly higher speeds.
- Laser toner powder is dry and does not smudge or run when handled immediately.
- Lower running cost per page for high-volume monochrome text print runs.
View Markscheme Points
- Scenario: Printing industrial duplicate receipts, delivery notes, or multi-part invoices on continuous carbonated stationery.
- Reason: Dot-matrix uses physical impact pins that press through carbon layers to duplicate printing onto multiple sheets simultaneously.
View Markscheme Points
- Definition: An output electromechanical transducer that converts electrical control signals from a computer into physical movement or mechanical force.
- Devices (any two): Electric motors, solenoids, hydraulic water valves, robotic arms, motorized door locks.
View Markscheme Points
- RFID tags do not require direct line-of-sight and can be read through boxes and packaging.
- Hundreds of RFID tags can be scanned and logged simultaneously in seconds as a forklift passes an antenna gate.
View Markscheme Points
- OLED pixels are individually self-emissive and do not require a global CCFL or LED backlight.
- When displaying black, individual OLED pixels switch off completely, drawing 0 watts of power and emitting true zero light.
View Markscheme Points
- Extremely fast automated data capture, processing thousands of answer sheets per hour.
- Eliminates human transcription errors, guaranteeing objective marking accuracy.
View Markscheme Points
- Produces patient-matched, custom-tailored prosthetics, crowns, and implants based directly on accurate CT/MRI scans.
- Allows surgeons to produce exact tactile 3D anatomical models of complex patient organs for pre-operative rehearsal.
Chapter 3 β Storage Devices & Media
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Storage Devices & Media
Magnetic, solid-state and optical backing storage, plus cloud storage vs cloud computing.
3.1 Magnetic Backing Storage
HDD (Hard Disk Drive) β spinning magnetised platters, a read-write head and an actuator arm. Speed is measured in RPM; rotational latency is the delay while the correct sector rotates under the head. Advantage: large capacity at low cost per GB. Disadvantage: moving parts are easily damaged by shocks or drops.
Other magnetic media: portable HDD (USB, for large backups), magnetic tape (low-cost, high-capacity, sequential-access β good for long-term archiving), and the legacy floppy disk.
3.2 Solid-State Backing Storage
Uses non-volatile NAND flash memory chips with zero moving parts: SSD (fast, durable), USB flash drive (portable, plug-and-play), and SD/XD/CFast memory cards used in cameras, phones and tablets.
3.3 Optical Backing Storage
A laser burns and reads microscopic pits and lands on a spiral track on a reflective disc.
- CD β about 700 MB.
- DVD β about 4.7 GB, red laser; dual-layer DVDs have two reflective layers.
- Blu-ray β 25β50 GB, short-wavelength blue laser (405 nm) for tighter pit packing.
Disc formats: -R (recordable once), -RW (rewritable), -ROM (read-only), DVD-RAM (simultaneous read/write, sector-based).
3.4 Cloud Storage vs Cloud Computing
Don't mix these up
Cloud storage is like a virtual remote hard drive β a place where your files simply sit. Cloud computing is like a virtual computer (CPU + RAM + programs) that actively runs processing tasks and applications over the internet, without using your local hardware.
- Public cloud β infrastructure owned by a third-party provider, open to public clients.
- Private cloud β dedicated infrastructure behind one company's own firewall.
- Hybrid cloud β combines public and private to balance security and cost.
Extended notes β Chapter 3 in full detail(tables, advantages/disadvantages, worked examples)
Key terms: Data transfer rate = speed at which data is sent between a storage device and a computer. Data access time = time taken to locate specific data. Serial access = data read in the order written (tape). Direct access = go straight to the data (HDD, optical, solid state). Latency = time for the required block of data on a track to rotate round to the read/write head.
3.1 Magnetic media and devices
| Device | How it works | Uses | Advantages | Disadvantages |
|---|---|---|---|---|
| Magnetic tape | Plastic strip coated with iron oxide; magnetised area = 1, demagnetised = 0; serial access | Batch processing (cheques, utility bills, payslips); backups of vast data; long-term archiving | Robust and stable; huge capacity; cheaper per byte than HDD; fast data transfer rate | Very slow access time; updating needs a master tape + transaction tape to make a new master; corrupted by magnetic fields |
| Fixed HDD | Platters (glass/ceramic/aluminium, magnetic coating) spin up to about 10 000 rpm; read/write heads (2 per platter) moved by actuator (voice coil); data in concentric tracks split into sectors; a FAT (file allocation table) maps free sectors; direct access | Stores OS, system and application software, files; real-time systems (robots, chemical plants) and online systems (airline booking, EPOS stock control); file servers | Very fast access and transfer; very large capacity | Can be damaged (head crash from bad shutdown, drops); many moving parts (less reliable); noisy compared with SSD; latency ("not responding") |
| Portable HDD | External HDD via USB | Backups; transferring files between computers | Fast access/transfer; large capacity | Easily damaged if dropped or not ejected properly; transfer rate slower than a fixed HDD |
3.2 Optical media and devices
- Read/written by a laser; data held as pits and lands on a single spiral track (centre to edge); the head does not touch the disc; sectors allow direct access.
- R = write once; RW = re-writable many times; ROM = read only.
- A shorter laser wavelength = higher capacity. CD uses red laser (780 nm); DVD red laser (650 nm); Blu-ray blue laser (405 nm).
- DVD can be dual-layer (two recording layers separated by a spacer; laser refocuses on the second layer). Single-layer DVD = 4.7 GB.
| Media | Uses | Advantages | Disadvantages |
|---|---|---|---|
| CD-R / DVD-R | Home recordings of music/films; data to keep or transfer | Cheaper than RW; once finalised acts like ROM | Can only be recorded once (error = wasted disc); not all players can read them |
| CD-RW / DVD-RW | Recording TV programmes (being replaced by HDD), CCTV, backups | Can be rewritten many times; different formats each time; files can be added later | More expensive; data can be overwritten accidentally |
| CD-ROM / DVD-ROM | CD: music, software, games, reference (encyclopaedia). DVD: films, large software/data. Where data must not be deleted/overwritten | Cheaper than HDD; permanent, cannot be altered | Slower transfer/access than HDD |
| Blu-ray | Home video consoles; HD movies; computer data storage and backing up HDDs; camcorders | Huge capacity (single layer about 25β27 GB, dual layer 50 GB); very fast transfer (36 Mbps vs 10 Mbps for DVD); faster access; automatic encryption against piracy | Expensive discs; encryption problems with video; HD DVD players reduced its advantage |
Blu-ray vs DVD: blue laser (405 nm vs 650 nm) means smaller pits and up to five times more data; more interactive (record HD TV, skip to any part, playlists, edit/re-order, find empty space to avoid over-recording, online extras).
3.3 Solid-state media and devices
- No moving parts; not magnetic. Data stored as 0/1 in transistors in NAND flash chips using floating gate and control gate transistors (charged floating gate = 1, uncharged = 0). A dielectric coating traps the electrons, so memory is non-volatile and rewritable. Charge can leak after about 12 months, so devices should be used at least once a year.
- SSD (solid-state drive): replacing HDDs as main backing storage.
- Benefits: more reliable (no moving parts); lighter; no need to "spin up"; lower power use; run cooler; very thin; access time about 0.1 ms vs 10 ms for HDD; faster data transfer.
- Drawback: limited endurance (a finite number of write operations), so not yet used everywhere in servers; more expensive per GB and lower capacity than HDD.
- Pen drive (memory stick) / USB flash drive: flash memory with a USB connector, powered from the computer. Uses: transporting files between computers, small backups, dongle (software anti-piracy). Adv: compact and portable; needs no extra software; not affected by magnetic fields. Disadv: cannot be write-protected; easy to lose; corrupts if removed during read/write. (Every pen drive is a flash drive, but not every flash drive is a pen drive.)
- Memory cards (SD, XD, CFast; micro SD): Uses: cameras, phones, MP3 players, hand-held devices. Adv: very compact, removable, no moving parts, large capacity. Disadv: more expensive per GB than HDD; lower capacity; finite number of read/write cycles; easy to lose; may need a card reader.
3.4 The future of storage
CDs and DVDs are becoming obsolete: many computers have no optical drive. Flash memory is the main way to transfer files, and music/movies are increasingly stored on HDD/phones, in the cloud, or streamed over the internet (smart TVs stream without DVD/Blu-ray players).
Exam tips
compare devices using capacity, speed (access time and transfer rate), portability, durability, cost. Always state why a medium suits the situation (e.g. tape for large-scale backups/archives; DVD-ROM/Blu-ray for read-only distribution; SSD for a lightweight laptop; pen drive for carrying files).
Quick recap β Chapter 3
- State one advantage and one disadvantage of HDD storage
- Explain why SSDs are more durable than HDDs
- Order CD, DVD and Blu-ray by capacity and explain why Blu-ray holds more
- Explain the difference between cloud storage and cloud computing in your own words
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- SSDs contain zero moving parts; HDDs have fragile spinning platters and sensitive read/write heads.
- SSDs are resistant to physical drops, knocks, vibrations, and mechanical head crashes.
- SSDs consume less battery power and generate negligible heat.
View Markscheme Points
- Significantly lower cost per terabyte for massive petabyte-scale storage.
- Long archival shelf life (up to 30 years if stored under controlled climate conditions).
View Markscheme Points
- Direct Access: The read head jumps immediately to the exact address of the data without reading intermediate blocks (e.g. HDD, SSD, Optical Disc).
- Sequential Access: Data must be read in linear order from the beginning until the target record is reached (e.g. Magnetic Tape).
View Markscheme Points
- Blu-ray uses a blue-violet laser with a shorter wavelength (405 nm) than DVD's red laser (650 nm).
- Shorter wavelength creates a tighter beam focus, allowing significantly smaller pits and lands etched closer together on tracks.
View Markscheme Points
- Files can be accessed remotely from any device anywhere with an internet connection.
- Facilitates seamless real-time file sharing and simultaneous collaborative editing.
- Protected from physical loss, theft, or local hardware failure.
View Markscheme Points
- Requires continuous high-speed internet; files are completely inaccessible during network or ISP outages.
- Ongoing recurring subscription fees for large storage tiers; risk of data privacy breaches on remote servers.
View Markscheme Points
- Allows simultaneous read and write operations on the same disc.
- Features concentric tracks divided into small sectors allowing it to behave like a removable hard drive.
- Can be rewritten up to 100,000 times (compared to ~1,000 times for DVD-RW).
View Markscheme Points
- Flash memory uses floating-gate transistors that trap electrical electrons.
- The trapped electric charge remains held indefinitely in an insulated oxide layer representing binary 1 or 0 without electrical current.
View Markscheme Points
- The delay time taken for the rotating magnetic platter to spin the required data sector under the read/write head.
View Markscheme Points
- Cloud Storage: A remote repository service for saving, archiving, and retrieving digital files across servers.
- Cloud Computing: Accessing remote processing power, hosted applications, and virtual CPU/RAM resources to execute software over the internet.
Chapter 4 β Networks & the Effects of Using Them
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Networks & the Effects of Using Them
Network hardware, addressing, network types, security & access control, anti-malware, and conferencing.
4.1 Core Concepts
Network β two or more devices connected to share data, resources and communication. Internet β a global WAN connecting millions of devices. World Wide Web β the collection of multimedia web pages hosted on web servers, following W3C standards.
4.2 Network Hardware β learn what each device does
4.3 Network Addressing
IP address β the logical location of a device on a network. IPv4 uses 32 bits, written in denary (e.g. 192.168.1.1). IPv6 uses 128 bits, written in hexadecimal, to solve the shortage of IPv4 addresses.
MAC address β uniquely identifies hardware, set at the factory. Built from 48 bits (6 hex pairs): the first 24 bits are the manufacturer ID, the last 24 bits are the device's serial number.
4.4 Types of Networks
- WAN β covers a large area (cities, countries); fibre-optic, leased lines, satellites.
- WLAN β a wireless LAN, usually Wi-Fi over 2.4 GHz / 5.0 GHz radio waves.
- LAN β a small area (home, school, office), using switches or hubs.
- PAN β a very small personal range (~10 m), commonly Bluetooth.
4.5 Security & Access Control
Biometrics (fingerprint, face, iris), physical tokens (smart cards, security keys, USB dongles), electronic tokens / OTP (one-time passcode via SMS, email or an app), and strong passwords (mixing upper/lowercase, numbers and symbols).
4.6 Anti-Malware Software
Anti-virus β scans files against malware signature databases, quarantines suspicious files, and cleans infections. Firewall β hardware or software that monitors incoming/outgoing traffic against security rules.
4.7 Electronic Conferencing
Hardware needed: microphone (audio in), webcam (video in), speakers/headphones (audio out). Common platforms: Zoom, Google Meet, Microsoft Teams.
Common mix-up
A hub broadcasts to everyone (dumb device); a switch sends only to the right device (smart device). A router connects different networks together and routes by IP address; a bridge connects two parts of the same network and filters by MAC address.
Extended notes β Chapter 4 in full detail(tables, advantages/disadvantages, worked examples)
4.1 Networks
A network = two or more computers/devices connected to share resources (printers, software, data). The internet is the largest (global) network; access is provided by an ISP (internet service provider).
4.1.1 Common network devices and terms
- NIC (network interface card): lets a device connect to a network; turns binary data into an electrical signal; usually integrated in the motherboard. WNIC = wireless version, uses an antenna (microwaves).
- MAC address (media access control): hard-coded at manufacture, uniquely identifies a device on a network. 48 bits, six pairs of hex digits (NN-NN-NN-DD-DD-DD: first half = manufacturer code, second half = device serial number). Never changes (changes only if the NIC is replaced); a "physical address"; useful for identifying network faults.
- IP address (internet protocol): identifies the location of a device on a network; given by the ISP; changes when you connect from a different place. IPv4 = 32 bits, four denary groups (e.g. 192.168.1.1). IPv6 = 128 bits, eight groups of hex separated by colons (created because IPv4 addresses are running out).
- Data packets: data is split into packets, each sent separately. A packet header contains: sender's IP address, receiver's IP address, packet sequence number (to reassemble in order), packet size (to check it arrived intact), and how many packets make up the message. Packets pass through several routers ("hops") to the destination.
| Device | What it does |
|---|---|
| Hub | Connects devices in a LAN; broadcasts every packet to all devices. Not secure (everyone receives everything) and creates unnecessary traffic. |
| Switch | "Intelligent hub"; keeps a look-up table of MAC addresses for its ports and sends each packet only to the intended device. More secure; saves bandwidth. Cannot talk to outside networks. |
| Bridge | Connects one LAN to another LAN that uses the same protocol; only two ports; scans MAC addresses; cannot connect to external networks. |
| Router | Routes packets between networks using IP addresses and a routing table (stored in RAM); joins a LAN to the internet; more than two ports; can connect networks using different protocols. Many home "routers" also work as a switch (store MAC and IP addresses). |
Router vs bridge: router connects different types of network, reads IP addresses, uses a routing table, has more than two ports; bridge joins networks with the same protocol, reads MAC addresses, no routing table, only two ports.
4.1.3 Wi-Fi and Bluetooth
| Bluetooth | Wi-Fi | |
|---|---|---|
| Frequency | 2.45 GHz band, 79 channels; spread-spectrum frequency hopping (changes channel several times a second to avoid interference) | 2.4 GHz and 5 GHz bands (5 GHz: faster but shorter range), split into channels |
| Range | Short (under about 30 m) | Up to about 100 m from an access point (walls reduce it) |
| Speed | Slower; low-bandwidth uses | Much faster |
| Devices | Small number (pairs; up to 7) | Many devices (depends on router) |
| Security | Key encryption | WEP and WPA (better security) |
| Best for | Close devices, speed not critical, e.g. phone to headset/mouse/speaker (personal area network) | Full-scale networks/internet access at hot spots |
4.1.4 Cloud computing (storage)
Data is stored on remote servers (often thousands, in many places) owned by a hosting company. The same data is kept on more than one server (data redundancy).
- Public cloud: client and provider are different companies. Private cloud: dedicated environment behind a company firewall. Hybrid cloud: mix; sensitive data private, less sensitive data in public cloud.
- Advantages: access from any device anywhere with internet; no need to carry storage devices; remote backup and disaster recovery; almost unlimited capacity; synchronisation across devices; easy collaboration on one file. Disadvantages: security/privacy worries (physical security, disaster resistance, provider staff access, hackers, pharming); needs a good internet connection; cost can be high for large storage/transfers; provider could fail (loss of data).
4.1.6 Network types
| LAN | WLAN | WAN | |
|---|---|---|---|
| Area | One building or nearby | Same as LAN but wireless (radio or infrared); uses access points (AP/WAP), needs several for large sites | Long distances (city/country); several LANs joined by routers; uses public telephone lines, satellites or leased lines. Example: bank ATM network |
| Devices | Computers, printers, hubs/switches, router | Wireless adapters + access points | Routers, end systems and intermediate systems |
- LAN advantages: share hardware/software; easy communication; network administrator manages security and passwords. Disadvantages: viruses spread more easily; queues for shared resources; slower external access; greater security risk than stand-alone; if the main server fails the network may stop working.
- Wired vs wireless LAN: wired = more reliable/stable, faster and more secure, cheaper to set up, but no mobility and cables are a hazard (tripping, overheating). Wireless = devices are mobile, easy to expand, no cables, but interference, thick walls block signal/dead spots, slower and less secure (easier to intercept, so encryption is essential).
- Extranets, intranets and the internet are covered in Chapter 10.
4.2 Network issues and communication
Passwords and authentication
- Protecting passwords: use anti-spyware; change regularly; avoid easy-to-guess ones (petβs name, favourite colour). Strong password: at least one capital, one number and one other keyboard character (e.g. Sy12@#TT90kj=0); weak: e.g. GREEN1.
- Zero login and biometrics: logging in without typing a password, using biometrics (fingerprint, face, voice) plus behavioural patterns (typing speed, how you swipe/walk, usual location). Adv: stronger security, quicker login. Concerns: users don't know when they are monitored; how protected the data really is.
- Magnetic stripe cards: particles act as N/S poles (0/1); swipe through reader; access only if data matches database; holograms and photos make forgery harder. Adv: easy, cheap, can be remotely deactivated, multi-purpose. Disadv: less secure (no encryption, easily copied), wear out, misreads.
- Smart cards (RFID/NFC): chip + antenna, read from a distance; store name, ID, PIN etc.; often combined with a PIN.
- Physical (hardware) tokens: device with an internal clock generating a one-time password (OTP) valid for under a minute. Disconnected token: user types the OTP in; connected token (USB) sends it directly. Bank example: insert debit card → press IDENTIFY → enter PIN → OTP shown → enter on website. A multi-factor authentication method (thief needs token, cloned card and PIN).
- Electronic (software) tokens: app on a smartphone generates an OTP (valid under a minute); the website server runs the same software with a synchronised clock; used with PIN/touch ID/face ID.
Anti-malware (anti-virus) software
Scans files before they run; compares against a database of known viruses; heuristic checking (looks for virus-like behaviour, useful for new viruses); infected files go to quarantine (auto-delete or user decides; a wrongly flagged file is a false positive); must be kept up to date; run full system scans regularly (e.g. weekly) to catch dormant viruses; scan anything downloaded or transferred.
Electronic conferencing
| Type | Notes |
|---|---|
| Video conferencing | Real-time video + sound over a network. Hardware: large screens, webcams (positioned so all delegates are visible), microphones (central), speakers. Software: webcam/microphone drivers, CODEC (coder-decoder / compression-decompression), echo cancellation |
| Audio conferencing | Standard phone network (organiser gets two PINs: personal PIN and participant PIN) or computer using VoIP (needs fast, stable broadband, otherwise drop-out, echo, noise) |
| Web conferencing (webinar/webcast) | Over the internet; users download an app or follow a link; features: screen sharing, slide presentations, whiteboard, document sharing, instant messaging, webcam, organiser controls who speaks |
Advantages of video conferencing: no travel costs (travel, hotels, venue hire, lost work time); can be set up at short notice; access to documents/experts; safer than travelling to unsafe places; better for the environment; includes staff not at headquarters. Disadvantages: time lag and jerky images; expensive to set up; time-zone differences; training needed; can demotivate staff who value travel; depends on a good network connection.
Exam tips
know clearly the difference between MAC (device, fixed) and IP (location, changes); hub vs switch; router vs bridge; Wi-Fi vs Bluetooth; and describe how packets travel using headers, routers and routing tables.
Quick recap β Chapter 4
- Explain the difference between a hub and a switch
- Explain the difference between a router and a bridge
- Compare IPv4 and IPv6
- Explain what a MAC address is and where it comes from
- List the 4 network types by geographic size, smallest to largest
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- A hub broadcasts incoming data packets indiscriminately to all connected ports/nodes.
- A switch reads destination MAC addresses and routes data packets only to the specific intended port.
- Switching drastically reduces packet collisions, cuts network congestion, and prevents data sniffing between ports.
View Markscheme Points
- Inspects incoming packet destination IP addresses to determine and forward along the optimal network path.
- Connects two separate networks operating across different address spaces (home private LAN to public Internet).
- Assigns dynamic private IP addresses to connecting local nodes using DHCP.
View Markscheme Points
- MAC addresses are permanent physical hardware identifiers hardcoded by the NIC manufacturer; IP addresses are logical addresses assigned dynamically or statically by the network.
- MAC addresses stay identical when a device moves to another location; IP addresses change depending on network connection points.
- MAC addresses use 48 bits written in hexadecimal; standard IPv4 addresses use 32 bits written in dotted denary.
View Markscheme Points
- A bridge connects two segments of the same local network running identical communication protocols.
- A gateway is required when joining two disparate networks using different protocols, as it translates packet protocols.
View Markscheme Points
- WLAN Advantage: Device mobility anywhere within signal range; easier to connect new student devices without drilling cables.
- WLAN Disadvantage: Data transfer speeds are slower than copper/fibre cables; radio signals suffer interference from walls and can be intercepted if encryption is weak.
View Markscheme Points
- IPv4 uses 32 bits yielding approximately 4.3 billion addresses, which have become practically exhausted by mobile and IoT growth.
- IPv6 uses 128 bits, providing trillions of unique hex IP addresses and removing the reliance on NAT workarounds.
View Markscheme Points
- High latency / Packet loss: Causes visual screen freezing, pixelation, or dropped calls.
- Jitter / Low bandwidth: Results in unsynchronized lip audio delay or robotic garbled speech.
View Markscheme Points
- Monitors and filters incoming and outgoing network traffic against a set of predefined security access rules.
- Blocks unauthorized port access and stops malicious intrusion packets or suspicious outgoing spyware broadcasts.
View Markscheme Points
- Definition: An interconnected network organized around an individual person spanning a very small radius (typically under 10 metres).
- Example: Connecting a smartwatch or wireless headphones to a smartphone using Bluetooth.
View Markscheme Points
- 2FA requires two distinct authentication factors: something you know (password) and something you have (physical phone OTP token or biometric).
- Even if the password is stolen, the unauthorized user cannot gain access without the physical second factor token.
Chapter 5 β The Effects of Using IT
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
The Effects of Using IT
Microprocessor-controlled devices, health problems and their fixes, and physical safety hazards.
5.1 Microprocessor-Controlled Devices
Positive impacts: saves time through automation, increases leisure time, allows remote control via apps, high convenience. Negative impacts: encourages a sedentary lifestyle, creates dependency on technology, and can cause a loss of manual skills (deskilling).
Examples: smart fridges that track and reorder food, smart heating that learns routines to save energy, automated smart security systems, and self-driving cars/drones that use sensors and microprocessors for safety and efficiency.
5.2 Health Problems & How to Fix Them
| Problem | Cause | Fix |
|---|---|---|
| RSI (Repetitive Strain Injury) | Repetitive typing or clicking | Ergonomic keyboard/mouse, wrist rests, regular breaks |
| Eye strain / headaches | Screen glare, flicker, staring too long | Anti-glare screens, the 20-20-20 rule, regular eye tests, good lighting |
| Back / neck ache | Poor posture, non-adjustable chairs | Adjustable ergonomic chair with lumbar support, footrest, monitor at eye level |
Exam tip β the 20-20-20 rule
Every 20 minutes, look at something 20 feet away for 20 seconds. It's a favourite exact-detail answer CIE examiners look for when asking how to prevent eye strain.
5.3 Physical Safety Hazards
- Trailing wires (tripping hazard) β use cable ducts, route cables under desks, use wireless where possible.
- Overloaded sockets (fire hazard) β avoid chaining extension blocks, install more wall sockets, keep tested fire extinguishers available.
- Heavy equipment (fall hazard) β use strong, stable desks, and keep devices away from desk edges.
Extended notes β Chapter 5 in full detail(tables, advantages/disadvantages, worked examples)
5.1 Microprocessor-controlled devices
5.1.1 Devices in the home
Labour-saving devices: automatic washing machines, microwave ovens, dishwashers, robotic vacuum cleaners, bread makers, smart fridges/freezers. Other devices: alarm clocks, TVs, central heating/air conditioning, home entertainment, phones/tablets (microprocessor adds features and ease of use).
| Effects of labour-saving devices | Advantages | Disadvantages |
|---|---|---|
| Lifestyle, leisure time, fitness | Less manual work, more leisure time; no need to stay at home while cooking/washing; can be controlled remotely by smartphone; automated burglar alarms give security; smart fridges can order fresh food and reduce waste | Unhealthy lifestyle from lack of exercise; make people lazy/dependent; loss of skills; cybersecurity risk |
| All microprocessor devices in general | Save energy (switch off after inactivity); easier to "programme" than knobs and buttons (e.g. scan QR code on food packaging to set the oven) | More wasteful society (failed circuit boards are not repaired, device thrown away); complex for technophobes; standby wastes electricity |
- Data security: internet-connected devices can be hacked; they often have a default/no password; hacking a heating app can reveal holiday dates (burglary risk); a smart fridge that orders food may expose card details. Prevention: different strong password on each device; install software updates.
- Social interaction: Positives: easy to make friends/find people with shared interests in chat rooms; cheap to keep in touch (VoIP, email). Negatives: less face-to-face contact (social isolation); can increase anxiety about meeting people; people may behave ruder/more aggressively online; cyberbullying.
5.1.2 Monitoring and controlling transport
Uses: motorway traffic monitoring, congestion-zone monitoring, ANPR, automatic traffic lights, air traffic control, railway signalling. Smart motorways: central computer controls signs to keep traffic moving/redirect after accidents.
| Transport systems (monitoring/control) | Advantages | Disadvantages |
|---|---|---|
| General | Adapt to traffic, reduce jams and journey time; more vehicles/trains/planes can use the network; offences penalised automatically with ANPR; stolen cars/criminals spotted; less human error, fewer accidents | Hackers could take control/cause chaos; system failure could halt the whole network; poorly designed systems; ANPR tracks innocent people's movements (who has the data?) |
- Autonomous (driverless) cars: use sensors (radar, ultrasonic), cameras (visual data), GPS, microprocessors running complex algorithms, and actuators (brake, steer, throttle, gears). Radar/ultrasonics build a 3D picture (useful in rain, fog, night). Example: red traffic light → recognise sign → check database → actuators brake and put in park → monitor constantly until green → release brakes and accelerate only if safe.
- Advantages: safer (no human error); better for the environment (efficient); less congestion (smooths "phantom traffic jams"); higher lane capacity and speeds; shorter travel times; stress-free parking. Disadvantages: very expensive to set up; hacking (including blocking or faking sensor data, tracking the owner); software glitches and update risks; dirty cameras/heavy snow can stop sensors; passenger reluctance; taxi driver unemployment.
- Autonomous trains: use LiDAR (lasers build 3D image), proximity sensors on doors, cameras (including infrared), GPS, actuators for speed/braking/doors. Advantages: punctual; lower running costs (fewer staff); safer; energy saving; higher frequency; easy to change schedules. Disadvantages: hacking; struggles on very busy services; high capital/operating/training costs; passenger behaviour (jamming doors, standing near platform edge); reluctance; needs CCTV at stations.
- Pilotless aeroplanes: sensors detect turbulence and cabin depressurisation; more self-testing of systems; GPS navigation; actuators control throttle, flaps, etc. Advantages: passenger comfort; lower running costs; safer (most crashes are pilot error); better aerodynamics (no cockpit). Disadvantages: security (e.g. terrorist attack with no pilot on board); emergencies hard to handle; hacking (e.g. via the entertainment system); software glitches that appear years later; passenger reluctance.
5.2 Health problems from prolonged use of IT equipment
| Health risk | Cause | Ways to reduce/eliminate |
|---|---|---|
| Back and neck problems | Sitting in front of a screen for long periods, poor posture | Fully adjustable chair; foot rests; tiltable screen raised to correct height (neck at right angle); regular breaks and exercise |
| RSI (repetitive strain injury, wrists/hands) | Continuous keyboard use or repetitive mouse clicking | Correct posture and arm angle; wrist rest; regular breaks; ergonomic keyboard; voice-activated software |
| Eyestrain | Staring at the screen too long; incorrect lighting/screen glare | Regular breaks (look away); anti-glare screens or blinds; use LCD instead of old CRT; regular eye tests (suitable glasses) |
| Headaches | Incorrect lighting, reflections, flickering screens, squinting | Anti-glare screen/blinds; regular breaks; eye tests |
| Ozone irritation (dry skin, respiratory problems) | Laser printers in offices | Good ventilation; laser printers in a separate designated room; use inkjet printers where possible |
Exam tips
for "effects" questions give both a positive and a negative; for health questions always give problem + cause + prevention. Do not confuse safety risks (e.g. electrocution, trailing cables, fire) with health risks (Chapter 8 covers physical safety).
Quick recap β Chapter 5
- Give one positive and one negative effect of microprocessor-controlled devices
- Name 3 ICT-related health problems and how to prevent each one
- Name 3 physical safety hazards in a computer room and their prevention
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- Causes: Continuous rapid typing on standard keyboards without wrist support; prolonged repetitive mouse clicking and gripping.
- Preventions: Use ergonomic keyboards and contoured vertical mice; install soft gel wrist rests; take regular scheduled rest breaks.
View Markscheme Points
- Fit anti-glare screen filters or adjust room blinds to eliminate sunlight reflections.
- Apply the 20-20-20 rule (every 20 minutes look at an object 20 feet away for 20 seconds).
- Adjust monitor brightness, contrast, and increase font size.
View Markscheme Points
- Cause 1: Overloaded electrical wall sockets or daisy-chaining multi-way extension blocks.
Prevention: Install dedicated wall power sockets and avoid multi-plug adapters. - Cause 2: Blocked computer ventilation louvres causing dust buildup and thermal overheating.
Prevention: Ensure adequate air conditioning and keep hardware fans free of obstructions.
View Markscheme Points
- Secure loose cables inside rigid plastic floor ducts / cable runners.
- Route cables under raised floors, along skirting boards, or migrate to wireless connections.
View Markscheme Points
- Can encourage a sedentary, inactive lifestyle leading to obesity as manual chores are eliminated.
- Causes over-dependence on technology and loss of basic domestic cooking/cleaning skills (deskilling).
View Markscheme Points
- Traditional craftsmen lose their specialised manual trade skills as computerized machinery/robots take over production.
- Workers are relegated to simple tasks such as pressing start buttons or monitoring conveyor belts.
View Markscheme Points
- Adjustable lumbar backrest support that conforms to the natural inward curve of the spine.
- Adjustable seat height and tilt allowing the user's feet to rest flat on the floor with knees bent at 90 degrees.
View Markscheme Points
- Health Hazard: Issues that cause long-term, progressive physical medical conditions over extended time (e.g. RSI, eye strain, spinal issues).
- Safety Hazard: Dangers that can result in immediate, sudden physical injury or fatal accidents (e.g. electrocution, tripping over cables, fire).
View Markscheme Points
- Saves daily commuting travel time and financial fuel/transit costs.
- Offers flexible working hours around family commitments and child care.
View Markscheme Points
- Risk: Inhaling volatile organic compounds, ozone gas, and fine toner particulates leading to respiratory irritation.
- Mitigation: Position laser printers in a well-ventilated dedicated printing room away from employees.
Chapter 6 β ICT Applications
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
ICT Applications
Real-world systems: modelling, control, schools, booking, banking, medicine, expert systems, retail, recognition and satellites.
6.1 Communication & E-Publications
Digital tools: email, video conferencing, VoIP, blogs, vlogs, wikis, social networks. E-publications (e-books, digital magazines, e-newsletters, PDFs) use responsive design, embedded multimedia, hyperlink navigation and screen-friendly sans-serif type. Advantages: cheap, portable, instantly updated. Disadvantages: needs a powered device, causes screen fatigue, risk of piracy, and a digital divide for those without access or skills.
6.2 Modelling Applications
Computer models simulate real systems safely and cheaply: financial forecasting, climate simulation, flight simulators (pilot training with no real risk), and weather forecasting.
6.3 Computer-Controlled Systems
Examples: automated greenhouses, central heating, traffic lights, chemical process plants.
6.4β6.6 Schools, Booking & Banking Systems
- School management β biometric/RFID attendance registration, performance tracking, and automated timetabling that avoids clashes.
- Booking systems β must process in real time to prevent double-booking: select seat β database temporarily locks it β payment confirmed β status updated to "booked".
- Banking β ATMs (PIN β verify β dispense cash β update balance), EFT (direct transfer between accounts), online banking (secured by encryption and TANs), and clearing (checking transactions between banks).
6.7β6.8 Medicine & Expert Systems
Medicine: centralised patient records for instant history retrieval, sensor-based patient monitoring with automatic alarms, and high-tech imaging (MRI/CT) plus robotic surgery.
Expert systems emulate a human expert's decision-making:
Used for medical diagnosis, mineral prospecting, chess strategy and tax advice.
6.9β6.11 Retail, Recognition & Satellite Systems
- POS β scans barcode β looks up price β prints itemised bill β updates stock. EFTPOS links POS directly to the bank for instant card authorisation.
- ANPR β camera captures the plate β OCR converts the image to text β checked against a database.
- GPS β satellites broadcast time/location, needing signals from at least 3β4 satellites. GIS analyses layered geographic data. Remote sensing maps weather and deforestation from orbit.
Extended notes β Chapter 6 in full detail(tables, advantages/disadvantages, worked examples)
6.1 Communication applications
- Newsletters and posters (made with word processing). Typical steps: open word processor → get photos (digital camera, internet with copyright permission, stored images, scanned prints) → upload/save → import → crop/resize → type or import text → position images and wrap text → proofread (spell checker) → save/print.
- Spell-checker cautions: wrong language variant (British/American); proper nouns flagged; homophones (where/were/wear) not caught; correct word may not be in the dictionary.
- Newsletter guidelines: don't overfill a page; clear fonts (Arial, Trebuchet) at 11β14 pt; consider columns; avoid capitals ("shouting"); bold headings rather than underline; real photos rather than clip art.
- Poster content: what/where/date/time/admission fee/extra facilities (event); image and main characters (film). Printed posters: eye-catching, targeted by location, but costly to display and weather-limited.
- Websites (HTML, browser, search engine): worldwide audience; sound/video/animation; hyperlinks and hot spots; buttons; hit counters; easy to update; cannot be defaced or thrown away. Disadvantages: can be hacked/pharmed; users need a computer and internet; must be maintained and promoted; hard to target the correct audience; expensive to build and secure.
- Multimedia presentations (with a projector): Advantages: animation, sound and video grab attention; hyperlinks to websites/cloud files; transition effects; flexible/tailored to audience. Disadvantages: expensive equipment; equipment can fail; may need internet; focus on the medium rather than the message; easy to overdo effects.
- Media streaming: continuous transmission from a remote server, played in real time with no need to store the whole file (download = store the whole file first). Needs stable fast internet (about 25 Mbit/s for HD). Data packets are buffered so playback is smooth; a larger buffer reduces freezing.
- E-publications (e-books, PDFs, Kindle): pages can be expanded, include media, cheaper (no printing costs), portable library.
- Mobile communication: phones use towers in overlapping cells; the network switches you to the next cell; international calls use satellites. Devices use a SIM card (cellular network) or Wi-Fi.
- SMS/text: quick and cheap; can be sent when the recipientβs phone is off; predictive texting speeds typing.
- Phone calls on the move: no need to find a public phone in emergencies; business/personal calls anywhere (networks less stable than landlines).
- VoIP: converts voice to digital packets sent over the internet; calls are free/cheap worldwide; problems: sound quality (echo, drop-out), security (identity theft, malware, spam, phishing).
- Video calling (FaceTime, Zoom) uses built-in camera/microphone/speaker; cloud-based Zoom needs no expensive infrastructure (live chat, screen sharing, recording).
- Internet access on mobile: phones automatically prefer Wi-Fi: cheaper (data caps), lower power use, better bandwidth.
6.2 Modelling applications (simulations)
A simulation = a computer model of a real system (based on mathematical representations) used to study, predict and influence behaviour.
- Advantages: cheaper than building the real thing; safer; try many scenarios; can test what is impossible in real life (space, nuclear reactors, crash tests); faster than real time (climate change, population growth).
- Disadvantages: only as good as the program and data; modelling can be costly; people may not trust results (models differ from reality).
- Examples: personal finance (spreadsheet "what-if" models, e.g. a tuck shopβs profit); bridge and building design (loading from traffic, wind, earthquakes, tidal waves/ice, vibration; fire; movement of people in lifts; combined with scale-model wind-tunnel tests); flood water management (river/inlet cross-sections, bridges/weirs/sluices, tides/wind, boundary conditions, dates, calibration data from past floods; Venice used sensors for faster, safer, continuous, more accurate warnings); traffic management (motorway lane closures: compare models A and B at different densities/speed limits/breakdowns; traffic-light simulation at a Y-junction using induction loop sensors to count vehicles, recording time of day, weekends/holidays, clearance time, pedestrians, turns; validate the model against real data, then test light timings); weather forecasting (weather stations with sensors e.g. air pressure, temperature, wind, rainfall feed a very powerful computer model; results compared with actual weather so the model "learns").
6.3 Computer-controlled systems
- Robots in manufacturing use sensors and actuators; good at repetitive tasks. Advantages: work in harmful environments; work 24/7; cheaper in the long term; higher productivity; consistent quality; free humans from boring work; different end-effectors for different tasks. Disadvantages: poor at unusual/one-off tasks; unemployment; loss of skills; factories can move anywhere; costly set-up and maintenance.
- Bottling/canning example: sensor 1 (pressure/light/camera) detects the bottle → computer signals actuator to fill → sensor 2 (level sensor) detects full → computer stops filling → another actuator caps → label applied; continuous until stopped. Benefits: faster (e.g. 120 cans/min), 24-hour production, consistent weight, built-in quality control, lower cost.
6.4 School management systems
- Registration and attendance: paper registers scanned by OMR; magnetic/RFID ID cards swiped (add PIN to stop someone swiping for a friend; GPS tracking possible but raises privacy concerns); fingerprint systems (unique, cannot be lost or cloned easily, not affected by magnetic fields; but slow to set up, expensive, cut fingers may fail, privacy concerns).
- Recording performance: exam/test results, behaviour and attendance data, CAT scores (standardised tests), class averages and reports.
- Computer-aided learning (CAL): enhances (does not replace) teaching. Advantages: learn at own pace/time; VR learning; can pause and resume; retake tests; interactive/multimedia; automatic marking of MCQs; micro-learning. Disadvantages: no hands-on lab experience; expensive and time-consuming to integrate; distractions online; isolation; cannot answer unusual questions.
6.5 Booking systems
Used for flights, hotels, theatres/concerts, sports events, trains.
- Advantages: prevents double-booking; instant availability feedback; book any time; easy seating-plan browsing; seats can be held temporarily; e-tickets save postage; special offers via email; apps. Disadvantages: expensive to set up/maintain; customers need a device and internet; harder to cancel/refund; system/server downtime stops bookings; poorly designed sites cause mistakes; no personal relationship.
- Process (seated concert): choose performance → enter date/time and number of seats → seating plan shown → select seats → database checked for availability → price shown → CONFIRM → seats temporarily held (marked unavailable) → enter details/log in → pay → seats booked → final details shown → email (possibly with QR code) → database updated with the booking. (Flights: same idea, plus passenger details and seat/class preferences; the database searches for available seats).
6.6 Banking systems
- ATM: insert card + PIN → choose service (withdraw, balance, deposit cheque via OCR, statement). Advantages: cash any time; many services without a branch; access from anywhere; quicker than queuing. Disadvantages: theft risk at night; shoulder surfing and card cloning; charges/limits; faulty card = no transaction; loss of personal contact.
- EFT (electronic funds transfer): direct bank-to-bank transfer (e.g. salaries, bill payments). Secure, quick, cheaper than cheques; can dispute for a period; but funds must be available immediately, cannot be easily reversed, cannot guarantee recipient identity.
- Chip and PIN payment process: PIN keyed in → card checked (expiry, stolen) → PIN read from chip and compared → if match continue → retailer's bank contacts customer's bank → funds/validity checked → authorisation code sent → amount deducted from customer's account and credited to retailer's → receipt printed.
- Credit vs debit cards: credit = borrow (interest-free period, customer protection, but high interest, credit damage, spending temptation); debit = money comes straight from your account (no credit/debt, but less protection and security risks).
- Cheques: safer than cash, can be stopped/traced, but slow, expensive, and easier for fraud. Image-based clearing: OCR reads cheque details, an image and digital record are sent to a central facility, which sends "request to pay" to the payer's bank → pay/no-pay usually under 24 hours.
- Internet (online) banking and shopping: Advantages: no travel, 24/7, worldwide market and cheaper prices, no queues, banks/shops save staff costs. Disadvantages: isolation, security (hacking, phishing, fraudulent sites), need computer/internet, can't see goods physically, delivery traffic/pollution, closure of high-street shops/banks, errors when transferring money. Effects on companies: lower staff costs, bigger customer base, extra cost of website security/delivery, less customerβemployee interaction, fewer robberies.
6.7 Computers in medicine
- Information systems: patient records, pharmacy records (check drug interactions), databases used to help diagnosis; patient records contain unique ID, medical history, X-rays/CT scans.
- 3D printers: print anatomical models for surgeons (planning from CT and MRI scans), prosthetics, artificial tissue using bio-inks (biomimetic), and 3D printed medicines tailored to the individual (patient-centric medicine): better release control, cost saving, better targeting, less risk of overdose.
- Expert systems (see 6.8) are also used for diagnosis.
6.8 Expert systems
Imitate an expert's knowledge to solve problems: medical diagnosis, prospecting for oil/minerals, fault diagnostics (car engine, circuit board), strategy games (chess), tax and financial planning, route scheduling, identification of plants/animals/chemicals.
| Component | Role |
|---|---|
| User interface | Dialogue with the user (often yes/no questions, boxes, prompts) |
| Knowledge base | Database of facts: objects and their attributes, gathered from human experts |
| Rules base | Set of inference rules (IF...THEN logic) |
| Inference engine | Problem-solving part; searches the knowledge base using the rules base; asks the user questions and draws conclusions |
| Explanation system | Explains the reasoning behind conclusions (and suggested actions, with probabilities) |
Building one: gather expert information → populate the knowledge base → create rules base → set up inference engine → develop user interface → test thoroughly. Example: identify an animal by questions (does it make sonic sounds? skin-covered body?) → conclusion: whale. Advantages: high level of expertise; consistent; stores vast facts; traceable logic; can hold many kinds of expertise; fast; unbiased; gives probability of a correct answer. Disadvantages: users need training; very expensive to set up/maintain; "cold" responses; only as good as the data; people wrongly assume it is infallible.
6.9 Computers in the retail industry
- Barcodes: parts: manufacturer's code, product code, check digit (error detection). Automatic stock control at POS: items scanned → barcode matched in the stock file → price returned to POS → stock level reduced by one → if stock ≤ re-order level, an order is placed automatically and the item is flagged as "ordered" → when goods arrive, cartons' barcodes update stock → itemised bill produced → daily takings file updated → loyalty points updated.
- EFTPOS: payment at POS using chip and PIN, magnetic stripe, or contactless/NFC. Chip and PIN advantages: more secure than magnetic stripe; quicker (also allows contactless). Disadvantages: PIN fraud/observation; not accepted everywhere.
- NFC/mobile wallets: phone held near terminal; NFC communication is encrypted and dynamic (changes every time); tokenisation (a substitute token, not the real card number, is stored/sent); protected by touch ID/face ID.
6.10 Recognition systems
- OMR (school registers, exams, surveys, lottery): fast and accurate but forms must be carefully designed, only works with pen/pencil marks, limited to preset options.
- ANPR (automatic number plate recognition): camera images processed with OCR. Uses: car park entry/exit and fees, average-speed cameras, congestion charging, security. Advantages: no guards needed, faster than tickets, monitors behaviour. Disadvantages: privacy issues, damaged/dirty plates not read, number plate cloning, less manned surveillance.
- RFID: tag (microchip + antenna), passive (powered by reader, most common) or active (battery). Uses: livestock tracking, retail/warehouse tracking, passports, car park access, toll roads/weigh stations, car production lines, contactless cards. Advantages: no line of sight, robust, harder to forge than barcodes, fast, read/write, bulk reading. Disadvantages: tag collision, jamming, hacking, initial cost.
- NFC (subset of RFID, very short range): peer-to-peer mode (two devices exchange data), read/write mode (active device reads a passive tag, e.g. advertising posters), card emulation (phone works as a contactless card for payments/transport).
- Biometrics: face, fingerprint/thumb, iris and retina recognition, voice. Retina: unique blood-vessel pattern at the back of the eye; infrared photo; very secure but invasive, slow, only in high-security settings. Iris: coloured part around the pupil; camera using visible and near-infrared light; used in immigration control, banks.
6.11 Satellite systems
- GPS (global positioning system; a GNSS run by the USA) uses satellites with atomic clocks to determine exact location; satnav uses it for route guidance. Advantages: safer than paper maps; warns of one-way streets/closures; estimates arrival time; fastest route/avoid towns; shows petrol stations. Disadvantages: out-of-date maps; road closures not always known; loss of signal; wrong start/end point gives wrong route.
- GIS (geographic information system): captures, stores, analyses and displays spatial (location-based) data as layered maps (e.g. planning, utilities, emergency services).
- Media communication: satellite TV and satellite phones (broadcast/communication over long distances and remote areas).
Exam tips
know one worked example for each application; describe how the computer is used (steps), then give advantages/disadvantages. For expert systems be ready to name all five components.
Quick recap β Chapter 6
- Describe the 4 steps of a real-time booking system
- Name the 4 components of an expert system
- Describe what happens at a POS terminal, step by step
- Explain how ANPR identifies a vehicle
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- Real-time processing is essential to prevent multiple customers booking the exact same seat concurrently (double-booking).
- When a customer selects an available seat, the database record is temporarily locked/flagged.
- If payment succeeds, the status permanently updates to "booked"; if payment fails or times out, the lock is released.
View Markscheme Points
- User Interface: Facilitates dialogue, allowing doctors to input patient symptoms and view diagnosis explanations.
- Knowledge Base: A repository containing medical facts and clinical data sourced from medical specialists.
- Rules Base: A set of logical IF-THEN conditional reasoning rules.
- Inference Engine: The problem-solving processing engine that applies the rules to the knowledge base to reach a diagnostic conclusion.
View Markscheme Points
- Barcode scanner reads the product code and searches the central stock database.
- The system retrieves the item description and price, adding it to the customer receipt.
- Stock level field for that item is decremented by 1 in the database.
- The current stock quantity is compared against the pre-set reorder level.
- If quantity <= reorder level, the system automatically sends an electronic purchase order to the supplier.
View Markscheme Points
- Sensor detects a vehicle approach and triggers a camera to capture a digital image of the registration plate.
- OCR software processes the image, locating characters and converting the graphical text into digital string data.
- The string is checked against a database of authorised subscriber plates or issued entry tickets.
- If a valid match is confirmed, an output signal is transmitted to an actuator to raise the barrier.
View Markscheme Points
- Safe simulation of extreme emergency flight scenarios (e.g. engine fire, severe storms) with zero risk to life or aircraft.
- Significantly lower operational costs (saves aviation fuel, aircraft maintenance, and insurance costs).
View Markscheme Points
- Customer inserts card and enters PIN, which is verified encrypted against the bank database.
- Customer enters requested withdrawal amount.
- System checks if account has sufficient funds and ensures amount does not exceed daily withdrawal limit.
- ATM checks its internal cash cassette to ensure sufficient bank notes are available.
View Markscheme Points
- At least four satellites are required.
- Three satellites provide latitude, longitude, and altitude via trilateration of time signals; the fourth corrects clock timing discrepancies.
View Markscheme Points
- Definition: Software designed to capture, store, manipulate, analyse, and present layered spatial and geographical data.
- Application: Planning urban emergency ambulance response routes, tracking disease outbreaks, or mapping flood risk zones.
View Markscheme Points
- Sensors continuously measure vital signs (heart rate, blood pressure, oxygen saturation).
- Analogue signals are converted to digital and compared by a microprocessor against safe threshold boundaries.
- If any vital parameter falls outside the acceptable range, an actuator sounds an audible alarm and flashes warning lights.
View Markscheme Points
- EFT: General electronic transfer of money from one bank account to another across computer networks.
- EFTPOS: Specific electronic payment transaction initiated at a retail checkout counter using a payment card terminal.
Chapter 7 β The Systems Life Cycle
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
The Systems Life Cycle
How a new ICT system is built: analysis, design, development & testing, implementation, documentation, evaluation.
7.1 Analysis
| Method | Pros | Cons |
|---|---|---|
| Observation | Reveals actual operational reality | Workers may change behaviour when watched (Hawthorne effect) |
| Interviews | Detailed, qualitative insight | Time-consuming and costly |
| Questionnaires | Fast, cheap, reaches many users | Low response rate, no follow-up questions |
| Document examination | Shows the exact data requirements | Rigid β misses human/operational issues |
All findings feed into a Requirements Specification β a document listing the hardware, software, user needs and constraints for the new system.
7.2 Design
Designers plan Data Flow Diagrams (DFDs), data capture forms, screen layouts, report layouts, validation/verification rules, data structures (file organisation, field names/types/lengths) and hardware/software specifications.
7.3 Development & Testing β the 4 data types
7.4 Implementation β Changeover Methods
| Method | How it works | Advantage | Disadvantage |
|---|---|---|---|
| Direct | Old system stops; new one starts immediately | Immediate benefit, lowest cost | High risk β no fallback if it fails |
| Parallel | Old and new run side-by-side for a period | Safe β old system is a full backup | Expensive, duplicate data entry |
| Pilot | New system tested in one branch first | Failure only affects that branch | Delays full rollout |
| Phased | Introduced module by module | Errors stay isolated to one module | Very slow; integration issues between modules |
7.5 Documentation
User documentation β for end-users: installation, requirements, saving/printing, error handling, FAQs. Technical documentation β for programmers/analysts: source code, algorithms, flowcharts, field definitions, validation rules.
7.6 Evaluation
Compare the finished system against the original Requirements Specification, identify limitations and future improvements, gather user feedback, and compare performance against the old system.
Exam tip
If a scenario asks you to choose a changeover method, always justify with risk vs cost: parallel running is safest but most expensive; direct changeover is cheapest but riskiest.
Extended notes β Chapter 7 in full detail(tables, advantages/disadvantages, worked examples)
Why replace a system? Old equipment is obsolete; law or tax changes; better hardware available; the company is expanding. A systems analyst oversees the process: analyse the current system, suggest improvements (costed and reported to management).
Stages: Analysis → Design → Development and testing → Implementation → Documentation → Evaluation (a two-way process: problems found later send the team back to an earlier stage).
7.1 Analysis
Methods of researching the current system
| Method | Advantages | Disadvantages |
|---|---|---|
| Observation (watch the system being used) | Reliable first-hand data; all inputs/outputs and key tasks seen; relatively inexpensive; can see body language | Time-consuming; people may behave differently when watched (work harder) |
| Interviews | Direct, can ask follow-up/modify questions; rich detail; individuals give honest views | Time-consuming and relatively expensive; interviewee cannot be anonymous and may be uncomfortable |
| Questionnaires | Relatively cheap; many people can respond quickly; can be anonymous (more honest); easy to analyse | Not all returned; questions limited; no follow-up; users may exaggerate |
| Examination of existing documents | See how data is stored/used; forms, files, inputs and outputs; can see problems first-hand | Time-consuming; expensive because of the analyst's time |
Recording and analysing the information: identify inputs, outputs and processing; problems with the current system; user and information requirements. A data flow diagram (DFD) shows inputs, processes, storage and outputs.
- User requirements: written by the analyst for the business managers in plain language, so customers can check the analyst understands the needs.
- Information requirements: what information is needed to support the business (what data, when, who).
- Analyst also identifies who the customers, vendors and employees are and how they interface with the system.
System specification (hardware/software requirements): identify and justify each choice.
- Input devices (barcode readers, scanners, touch screens); output devices (3D printer, large monitors for CAD, speakers for disabled staff).
- Software: operating system; applications: off-the-shelf (cheaper, quicker, tested) or bespoke (written for the company: exactly fits needs but costly and slow).
- Storage: size, type, access/write speeds, number of read/write operations, serial vs direct access.
7.2 Design
File/data structures: each field has a field name (e.g. product_code), field length, data type, and any coding (e.g. codes T, A, B). The primary key is the field that is unique (e.g. product_code).
- Data types: text/alphanumeric; numeric (integer, decimal/real, currency); date/time; Boolean (yes/no, true/false).
Validation (checks that data is reasonable, not that it is correct) and verification (checks data was entered/transferred accurately):
| Validation check | Purpose |
|---|---|
| Range | Value within limits (e.g. month 1β12) |
| Type | Correct data type (e.g. only numbers) |
| Length | Correct number of characters (e.g. 8-character password) |
| Format | Correct pattern (e.g. dd/mm/yyyy) |
| Presence | Field not left empty |
| Check digit | Last digit calculated from others; detects keying errors |
| Lookup | Value must be in a list |
| Consistency | Fields agree with each other (e.g. age vs date of birth) |
Verification: visual check (compare with source) and double entry (type twice and compare). Validation cannot detect a wrong-but-reasonable value.
Input formats (data capture forms): clear heading; make clear where to write; text boxes/character boxes (limit information; one box per character for surnames/phone numbers); tick boxes; enough space; clear fonts and colours. Screen forms add: on-screen help, drop-down/combo boxes for limited choices, radio buttons/tick boxes (one click), automatic validation, control buttons (next, clear, save), double-entry boxes for key data.
Output formats (screen and report layouts): output fields sized correctly; clear instructions/descriptions; full screen/page used well; suitable colours and fonts for readability.
7.3 Development and testing
- Build the file structures, validation routines, input/output formats and user interface; software is often written in modules, each tested separately, then the whole system is tested together (modules may work alone but fail when combined). Problems mean improving design and testing again.
- Test plan: list of tests; the data to be used; the type of test data; live data; expected outcomes; do actual outcomes match expected?
- Test data types: normal (valid, expected outcome); extreme (at the limits of acceptability, e.g. months 1 and 12); abnormal (outside limits or wrong type, e.g. 0, −1, 13, 45, "July", 3.5). Live data = real data with known results, compared with the old system's results.
- Test: data structures, file structures, input methods, output formats, validation rules.
7.4 Implementation
Staff must be trained. Changeover methods:
| Method | How | Advantages | Disadvantages |
|---|---|---|---|
| Direct | Old system stopped, new started immediately | Benefits immediate; cheapest (only one system) | Disastrous if it fails; no fallback; staff not gradually trained |
| Parallel | Old and new run together for a period | Old system still available if new fails; results can be compared; staff trained gradually | More expensive (extra staff); more time-consuming (data entered twice) |
| Phased | New system introduced part by part | If a part fails only that part is affected; staff trained area by area; cheaper than parallel | More expensive than direct; time-consuming as each part must work before the next |
| Pilot | New system trialled in one location/department first | Any problems affect only the pilot; can be fixed before full roll-out; staff there gain experience | Slower to reach all users; pilot users may not represent everyone |
7.5 Documentation
- Technical documentation (for programmers/analysts, to maintain and upgrade): purpose of the system, limitations, program listing/coding, programming language, flowcharts/algorithms, minimum hardware/memory requirements, known bugs, list of variables and their meaning, file structures, sample runs with test data and results, meaning of error messages.
- User documentation (for end users): purpose of the system, limitations, how to load/install/run, how to add/delete/amend records, screen and print layouts, sample runs, error messages and their meaning, troubleshooting guide, help lines/FAQs.
7.6 Evaluation
Evaluate after the system has been in use (and to plan maintenance):
- Compare the final solution with the original task requirements; identify limitations and needed improvements; evaluate users' responses; compare test results and performance with the old system.
- Methods: observe users doing set tasks (old vs new); measure time taken; interview users; questionnaires about ease of use.
- Questions: is it efficient (in use, in use of resources)? easy to use? appropriate for the task?
- Later changes: update hardware (user feedback, new hardware available, company changes) and software (feedback, company changes, changes in legislation).
Exam tips
know all four research methods with an advantage and a disadvantage of each; learn all validation types with an example; normal/extreme/abnormal test data (be ready to give examples for a given range); pick the changeover method that fits the scenario (e.g. life-critical system → parallel).
Quick recap β Chapter 7
- Recite the 6 stages of the Systems Life Cycle in order
- Give one advantage and one disadvantage of interviews vs questionnaires
- Define normal, abnormal, extreme and live test data with an example each
- Compare direct, parallel, pilot and phased changeover
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- Interviews: Allow deep probing with flexible follow-up questions; time-consuming, expensive, and interviewer can introduce bias.
- Questionnaires: Distributed rapidly to hundreds of respondents at minimal cost; questions cannot be clarified, and return rates are often low.
View Markscheme Points
- Normal: Any integer strictly between 1 and 99 (e.g. 45, 78).
- Extreme: Exactly 0 or exactly 100 (boundary values accepted).
- Abnormal: Negative numbers (e.g. -1), numbers > 100 (e.g. 101, 150), or textual letters (e.g. "pass", "abc").
View Markscheme Points
- Direct changeover is catastrophic if the new system experiences critical bugs, as patient records would become inaccessible.
- Parallel running maintains the trusted old system as an active backup until the new system is fully proven.
- Hospital staff can cross-verify output accuracy across both systems.
View Markscheme Points
- Pilot: The entire completed system is deployed into one branch/department of the business before rolling out to others.
- Phased: The system is introduced in parts / one modular subsystem at a time across the entire organisation.
View Markscheme Points
- Validation: Automated software check to ensure entered data conforms to pre-set rules / is reasonable (e.g. Range check, Length check, Format check).
- Verification: Checking that data has been copied accurately from the original source without transcription error (e.g. Double data entry, Visual proofreading check).
View Markscheme Points
- Step-by-step software installation and loading guide.
- Frequently Asked Questions (FAQs) and user troubleshooting advice.
- Tutorial on formatting, saving, printing reports, and searching data.
View Markscheme Points
- Full program source code / annotated script listings.
- System flowcharts / Data Flow Diagrams (DFD) and algorithms.
- Database schemas, file structures, field names, data types, and validation rules.
View Markscheme Points
- Comparing system performance directly against the original Requirements Specification criteria.
- Gathering usability feedback and efficiency metrics from users to identify limitations and plan future enhancements.
View Markscheme Points
- Range check: Confirms numbers fall between a designated minimum and maximum bound.
- Presence check: Ensures a field is not left blank before submitting.
- Format/Picture check: Confirms input strictly follows a required pattern (e.g. LLNN NLL for a postcode).
View Markscheme Points
- Establishes an agreed legal contract between the client and system developers outlining expected functional deliverables.
- Defines necessary minimum hardware, software, user constraints, and acts as the benchmark for system evaluation.
Chapter 8 β Safety & Security
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Safety & Security
Physical safety, the Data Protection Act, e-safety, and β in full detail β every major security threat and how systems repair and defend against them.
8.1 Physical Security & Safety Hazards
Physical security methods: key/electronic locks, CCTV, biometric access control, security guards, and hardware anchoring (cable locks, floor/desk mounts).
| Risk | Cause | Prevention |
|---|---|---|
| Electrocution | Spilt liquids, exposed/damaged wires, unsafe sockets | Ban drinks in computer rooms; use circuit breakers (RCBs); inspect wiring and insulation |
| Fire hazard | Overloaded sockets, blocked vents/dust, short circuits | More sockets, no daisy-chained extensions; clear vents; ventilate the room; keep tested extinguishers ready |
| Tripping hazard | Trailing wires, damaged flooring | Cable ducts, route cables under desks, use wireless where possible |
| Personal injury | Heavy equipment falling from unstable desks | Strong, sturdy desks; keep equipment away from desk edges |
8.2 Data Protection & E-Safety
Data Protection Act β 4 key rules:
- Data must be accurate and up to date.
- Data must not be kept longer than necessary.
- Data must be fairly and lawfully processed.
- Data must be kept secure against unauthorised processing, loss or damage.
Personal data identifies a living individual (name, address, email, date of birth). Sensitive personal data needs extra protection (political views, religion, criminal record, biometric data).
E-safety guidelines: never share personal details online; use strict privacy settings; block/report cyberbullies; only add people you actually know; check for the padlock/https:// on websites; be wary of email attachments and phishing links.
8.3 Security of Data β threats, and how each is repaired/prevented
This is the section most exam questions expect in full detail: name the threat, explain how it works, and state the specific prevention or repair method.
| Malware | How it behaves |
|---|---|
| Virus | Replicates itself to delete or corrupt files; needs an active host program or infected OS to run. |
| Worm | Stand-alone; replicates and spreads on its own across networks that have weak security. |
| Trojan horse | Malicious code disguised as legitimate software, which it replaces or embeds itself into. |
| Spyware | Secretly monitors activity and sends data to the attacker, often including keylogging. |
| Adware | Floods the system with unwanted pop-ups and may redirect the browser to advert sites. |
| Ransomware | Encrypts the victim's files and demands payment for the decryption key β usually delivered via a Trojan. |
How anti-virus software repairs an infected file
Anti-virus software works in three stages: it scans files against a database of known malware signatures, quarantines any suspicious file so it cannot run or spread, and then either cleans/repairs the file by removing the malicious code, or deletes it if it cannot be safely repaired. Keeping the signature database updated is essential, because it can only recognise threats it already knows about.
8.3.2 Protection & Authentication Methods
Card fraud: card cloning (copying card details) and shoulder surfing (watching someone type their PIN).
Extended notes β Chapter 8 in full detail(tables, advantages/disadvantages, worked examples)
8.1 Physical safety
Physical safety = dangers that can cause serious injury or loss of life (different from health risks in Chapter 5).
| Hazard | Prevention |
|---|---|
| Spilling drinks on equipment (electrocution) | No drinks/food near computers |
| Exposed/damaged wires; unsafe sockets | Check and renew wires regularly; electrician checks; use an RCB (residual current breaker); cover exposed wires |
| Overloaded sockets, overheating equipment (fire) | More sockets/fewer devices per socket; don't cover cooling vents; clean dust; good ventilation; fully tested equipment; low-voltage equipment; CO2 fire extinguishers (not water) |
| Trailing wires (tripping) | Cable ducts; hide/cover wires; use wireless connections |
| Heavy/unstable equipment | Strong desks and large tables; secure equipment |
8.2 E-safety
Data protection: data protection acts (DPAs) protect personal data; typically based on eight principles: data must be processed fairly and lawfully; used only for stated purposes; adequate, relevant and not excessive; accurate; not kept longer than necessary; processed in line with the data subject's rights; kept secure; not transferred to countries without adequate protection.
- Personal data: data about a living person who can be identified from it (name, address/email, ID/passport number, mobile advertising ID, photographs). Sensitive personal data: political party/trade-union membership, religion or beliefs, ethnic origin, sexual orientation/gender, health, criminal record, biometric/genetic data.
- Keeping data safe (general guidelines): don't leave personal information on desks; lock filing cabinets; don't leave data on unattended screens (log off); use secure passwords/user IDs; don't send personal data in emails/attachments unprotected.
E-safety = benefits, risks and responsibilities when using ICT (internet, email, social media, online games).
- Internet: use trusted, secure sites (recognised by https/padlock, encrypted connections for purchases); set search engines to safe search; use sites recommended by teachers/parents; be careful what you download; log out of sites (cookies); keep personal details private.
- Email: open only emails/attachments from known sources; use spam filtering; only reply to people you know; check sender addresses; don't include your name/personal details; don't send photos of yourself (e.g. in school uniform); beware phishing/pharming; use strong passwords; manually type addresses; avoid clicking hyperlinks in emails (even "unsubscribe" links can be harmful); use Bcc rather than To/Cc for multiple recipients.
- Social media: don't post personal information or photos to strangers; use privacy settings; make sure photos can't reveal your location/school; only accept friends you know; avoid inappropriate language; use a nickname, never your real name, and keep private data secret.
- Online gaming risks: predators, cyberbullying, webcam misuse, voice-masking technology (hides identity), malware/phishing/spyware, violence in games.
8.3 Security of data
Threats: hacking, phishing, pharming, smishing, vishing, malware, card fraud, spyware, etc. Effects: data deletion, fraud, identity theft, loss/corruption.
| Threat | Description | Protection |
|---|---|---|
| Hacking | Unauthorised access to a computer/data (can lead to deletion, corruption, theft) | Firewall, strong passwords, anti-malware, encryption, biometrics/2FA, user access levels |
| Phishing | Legitimate-looking email tricks user into revealing details or visiting a fake site (clues: generic greeting, urgent language, bad spelling, links/"contact us" that don't work) | Don't click links; check addresses; spam filters; awareness |
| Pharming | Malicious code redirects user to a fake website even if the correct address is typed | Anti-malware; check the URL/https; keep software updated |
| Smishing | Phishing by SMS text message (users think phones are not at risk) | Don't click links/reply; be cautious |
| Vishing | Phishing by voice call/VoIP (caller pretends to be from a legitimate company) | Don't give details by phone; call back on official number |
Malware: software designed to harm a computer system.
| Type | What it does |
|---|---|
| Virus | Program code that replicates itself and can corrupt/delete data; needs a host file; spread by email attachments, infected websites, downloads |
| Worm | Stand-alone virus that self-replicates and spreads across networks to weak-security computers |
| Trojan horse | Malicious program disguised as legitimate software; often delivers other malware (e.g. ransomware); replaces part of the system when run |
| Spyware (incl. key loggers, screen recorders) | Secretly records key presses/screen to steal passwords and personal details (on-screen keyboards/drop-down boxes help defeat key loggers) |
| Adware | Floods the user with unwanted adverts; may hijack the browser/change default search; hard to remove |
| Ransomware | Encrypts the user's files and demands payment (ransom) to decrypt; often installed via a Trojan or social engineering; backups avoid paying |
- Card fraud:
- Shoulder surfing: watching someone key in a PIN/card details (or listening to details given over the phone). Prevent: shield the keypad; don't enter details in view of CCTV/others in public.
- Card cloning / skimming: a skimmer device copies magnetic stripe data; chip and PIN (and contactless) give more security.
- Online card use: security code (CVV), SSL, two-factor authentication.
- Biometrics (unique physical features):
- Fingerprint: compares ridge/valley patterns; unique, cannot be lost or shared; but relatively expensive, damaged fingers cause problems, civil-liberty concerns, dirty/wet skin errors.
- Face recognition: measures distance between eyes, cheekbone shape etc.; contactless and cheap, but affected by lighting, glasses, expression.
- Retina/iris: very secure and no known way to replicate, but expensive, intrusive and slow (retina).
- Voice recognition: cheap and quick, but a voice can be recorded and an illness (cold) changes it.
- Digital certificates: a pair of files: public key (anyone) and private key (owner only). Contains: sender's email address, owner's name, expiry date, public key, digital signature of the certificate authority (CA) (e.g. VeriSign). Used to prove identity and for digital signatures.
- SSL/TLS (secure sockets layer): protocol that encrypts data between browser and web server; recognised by the https and padlock; the SSL certificate binds an encryption key to an organisation's identity. Used in online banking/shopping, email, cloud storage, intranets/extranets, VoIP/video chat, messaging, social networking.
- Encryption: scrambles data (plain text → cypher text) using an encryption key; the decryption key turns it back. Doesn't stop hacking, but makes data unreadable without the key. Symmetric: same key both ways. Asymmetric: public key encrypts, private key decrypts. Encrypt: data on cloud storage, emails (content and connection), stored files, financial data.
- Firewall (hardware or software): examines "traffic" between a computer/network and the internet; checks incoming and outgoing data against a set of criteria; blocks traffic that fails and warns the user; logs all traffic; can block undesirable websites; helps stop hackers and viruses entering; warns if software tries to access the internet.
- Authentication: something you know (password/PIN), something you have (phone, token, card), something you are (biometrics). Two-factor authentication requires two different methods (e.g. password + one-time code sent to phone). Passwords: strong = capital letters, numbers, other characters; change regularly; keep secret; use anti-spyware; limited attempts and check on login.
Exam tips
always link a threat to its protection; phishing/pharming/smishing/vishing differences are commonly tested; describe how a firewall works (criteria, block, log); know that encryption does not prevent hacking — it makes stolen data useless.
Quick recap β Chapter 8
- State the 4 rules of the Data Protection Act
- Explain the difference between phishing and pharming
- Describe how a virus differs from a worm and a Trojan horse
- Explain the 3 stages anti-virus software uses to deal with an infected file
- Explain what 2FA and SSL each protect against
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- Phishing: Relies on social engineering; fraudulent emails containing forged links deceive users into voluntarily visiting fake sites and revealing login credentials.
- Pharming: Malicious code installed on user's hard drive or poisoning DNS servers; silently redirects users to a spoofed website even when the user types the genuine URL.
View Markscheme Points
- Ransomware quietly encrypts user files and databases using strong cryptographic algorithms, rendering them inaccessible.
- Displays an extortion ransom note demanding untraceable cryptocurrency in exchange for the private decryption key.
- Mitigation: Regularly create isolated, air-gapped offline backups to restore files without submitting to extortion.
View Markscheme Points
- A virus requires an existing executable host file or human execution to run and replicate.
- A worm is a self-contained, standalone program that replicates independently across network connections without human interaction.
View Markscheme Points
- Encryption scrambles readable plaintext into unreadable ciphertext using a mathematical key.
- If intercepted by unauthorized packet sniffers, the data cannot be comprehended or exploited without the corresponding decryption key.
View Markscheme Points
- The website owner's authenticated public key.
- Digital signature and identity of the issuing Certificate Authority (CA).
- Validity date range and domain name.
View Markscheme Points
- If biometric data is ever compromised or stolen, it cannot be changed or reset like a password.
- Scanners can reject authorized users (false negative) if fingers are dirty, sweaty, or injured.
View Markscheme Points
- Data must be obtained fairly, lawfully, and used only for stated registered purposes.
- Data must be kept accurate, up-to-date, and retained no longer than necessary.
- Organisations must implement adequate security safeguards against unauthorized access or accidental loss.
View Markscheme Points
- Definition: Secretly peering over someone's shoulder or using concealed cameras to watch them enter their PIN.
- Preventions: Shielding keypad with hand; physical privacy mirrors/shields installed on ATM surrounds; masking PIN characters on screen as asterisks.
View Markscheme Points
- Keylogger software secretly records every physical keystroke pressed on the keyboard.
- Logs are quietly uploaded over the internet to an external attacker, revealing usernames and passwords.
View Markscheme Points
- Smishing: Phishing carried out via SMS text messages containing malicious links.
- Vishing: Voice phishing carried out via deceptive telephone calls impersonating bank or authority officials.
Chapter 9 β Audiences
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Audiences
Tailoring ICT work to who will actually read, watch or use it β plus copyright and plagiarism.
9.1 Audience Appreciation
- Age β young children need bright colours, simple vocabulary and large text; adults/professionals need structured, data-driven layouts.
- Target group β specific interests, language ability and digital literacy level.
- Context β a formal business presentation needs a different style to a casual blog or social post.
When writing a presentation, consider: the language used, how much multimedia to include, the length, how much audience participation is invited, and whether practical examples are used to illustrate points.
Audience characteristics to plan for: age range, income level, specific interests, disabilities (visual/auditory), and the different expectations of children, adults and older people.
9.2 Copyright & Plagiarism
Product keys and holograms are used as security controls to verify that a software installation is genuine.
Extended notes β Chapter 9 in full detail(tables, advantages/disadvantages, worked examples)
9.1 Audience appreciation
When planning any ICT solution (presentation, website, game, database, VR system) consider the audience: knowing their characteristics and needs makes the solution fit for purpose and more successful.
- Presentations – factors to consider: age of the audience; their experience and expectations; their knowledge (technical language only for a technical audience); length (long presentations only work if engaging; very young audiences get restless); need for multimedia; audience participation/interactive approach (but not everyone wants to take part); examples used (be considerate, e.g. no meat examples for vegetarians).
- Sound, video and animation catch attention, but don't overdo them (the message gets hidden). Complicated ideas are better explained with graphs/animations. No vulgar or inappropriate language.
- Example: a phone company's presentation to the sales team (technical knowledge, interested in profit/bonus) versus to customers (interested in price and features).
- Website audience characteristics: age, interests, income level, disabilities/impairments, language ability.
- Very young children: bright, cheerful colours; animation and sound; more pictures than text; large font, simple short words; games; very easy interface (touch/voice).
- Teenagers/adults: interesting content; mix of text and images; suitable language level; bullet points.
- Older or visually impaired users: larger font; contrasting colours; consistent display page to page; concise, non-technical language; easy interface (touch screen).
- Finding out about the audience: interview a cross-section, give questionnaires/surveys, analyse the results.
- Why consider audience needs: clear fonts for those with sight problems; complex language puts off children and second-language speakers; users must be kept interested or they leave; attractive, clear, easy interfaces keep people engaged; too much typing or poor navigation causes frustration.
9.2 Copyright
- Software is protected by copyright like music, films and books. Illegal actions: copying software and selling/giving it away; using it on a network or several computers without a licence; using its code in your own software and selling it as yours; renting it out without permission; using the name of copyrighted software on other software without agreement.
- Software piracy = illegal copying of software.
- How software is protected against piracy: unique product key entered at installation; licence agreement ("I agree") before install; hologram sticker/warning on packaging; software only runs if the original CD/DVD/memory stick is in the drive; dongle (USB device) must be plugged in; online activation/downloads tied to accounts.
- Organisations such as FAST (Federation Against Software Theft, UK) prosecute infringers, with legal penalties; similar bodies include IIPA (USA) and JIPA (Japan).
- Also protected by copyright: images, text, music, video downloaded from the internet: you need the copyright holder's permission to use them.
Exam tips
for audience questions, name the audience group, state a suitable feature and give a reason (e.g. large font and contrasting colours for visually impaired users so text is easier to read).
Quick recap β Chapter 9
- List 3 factors to consider about your audience before designing a document
- Explain the difference between copyright and plagiarism
- Explain what a software licence gives you permission to do
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- Vibrant, colourful visual presentation with minimal dense blocks of text.
- Large, clear fonts and audio voice prompts / spoken narration.
- Prominent, graphical icon-based navigation buttons requiring minimal typing.
View Markscheme Points
- Professional, muted colour schemes without excessive distracting animations or sound effects.
- Data-focused content structured with clear charts, executive bullet summaries, and factual financial metrics.
View Markscheme Points
- Copyright Infringement: Illegally reproducing, distributing, or publishing copyrighted material without legal rights or author permission.
- Plagiarism: Presenting someone else's original ideas, writing, or analysis as one's own without proper academic citation or attribution.
View Markscheme Points
- Requiring unique alphanumeric product activation license keys linked to online authentication servers.
- Using hardware security dongles (USB tokens) or holographic security stickers on genuine retail media.
View Markscheme Points
- Comprehensive descriptive alternative text (alt tags) on all images for screen-reading software.
- Resizable high-contrast text modes (e.g. yellow on black) and scalable vector layouts.
View Markscheme Points
- In large auditoriums, text font size must be significantly larger so attendees at the back can read comfortably.
- Audio projection volume and external microphone amplification must match acoustic venue size.
View Markscheme Points
- Single-User Licence: Authorises the installation and execution of the software on only one designated computer.
- Site Licence: Grants legal permission to install and run the software across all computers within a specific institution or school campus.
View Markscheme Points
- Open-source software includes accessible source code that anyone can inspect, modify, and redistribute freely.
- Proprietary software is distributed only in compiled binary format; underlying source code remains a closely guarded commercial trade secret.
View Markscheme Points
- Preference: Sans-serif fonts (e.g. Arial, Helvetica).
- Reason: Clean, unembellished strokes render more legibly across lower-resolution digital screens without visual blur between characters.
View Markscheme Points
- Restricts unauthorized copying, illegal redistribution, printing, or transfer of digital media to unauthorized third-party devices.
Chapter 10 β Communication
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Communication
Email, the internet vs the World Wide Web, web platforms, protocols, and staying safe online.
10.1 Communicating by Email
Internet is a global public network of networks; an intranet is a private internal network for one organisation only (e.g. a school portal).
Email structure: To, CC (Carbon Copy), BCC (Blind Carbon Copy β hides recipients from each other), Subject, message body, attachments.
Netiquette: use appropriate language, never type in ALL CAPS (it reads as shouting), keep messages concise, and respect other people's privacy.
10.2 Effective Use of the Internet
| Internet | World Wide Web (WWW) |
|---|---|
| The global network of interconnected networks and devices | A collection of multimedia web pages hosted on websites |
| Uses TCP/IP | Uses HTTP/HTTPS to transmit HTML documents |
| Carries email, chat, FTP file transfer | Uses URLs to locate web pages |
| The underlying physical network infrastructure | Accessed through web browser software |
Web platforms: Blogs (personal online journals), Wikis (collaborative, editable pages), Social networking sites (profiles and shared media), Forums (threaded discussion boards).
Navigating the internet: an ISP provides your connection; a web browser lets you view pages; a search engine searches an index of websites for your keywords. Use quotation marks for an exact phrase and AND/OR/NOT as logical search operators.
Evaluating whether a website is reliable
- Check the domain β
.govand.eduare generally more authoritative - Verify the author's credentials
- Watch for spelling and grammar errors
- Check when the page was last updated
- Cross-reference the facts against other trusted sources
URL structure: protocol://website address/path/filename
Communication Protocols
Internet risks to remember
Malware, phishing scams, unauthorised network access, pharming and cyberbullying are the risks CIE most often asks you to identify and suggest a prevention for β link each one back to the specific defence covered in Chapter 8.
Extended notes β Chapter 10 in full detail(tables, advantages/disadvantages, worked examples)
10.1 Communication with other ICT users using email
Email = electronic messages sent over a network. Features: To, Cc, Bcc, subject, body, attachments, reply, forward, email groups.
- Laws and codes of practice: many countries have laws against misuse of email; organisations set an acceptable use policy/code of practice. Companies may limit which devices/accounts staff use and what can be sent. Emails are subject to copyright law.
- Unacceptable content: abusive, profane, inflammatory, coercive, racist, exploitative or violent messages; illegal material; confidential information youβre not entitled to share (read only if you are the intended recipient).
- Security of email: strong passwords (not a petβs name), change regularly, spam filters (send suspicious mail to a junk folder), anti-virus and anti-spam software. Emails can suffer passive attacks (interception/reading) and active attacks (viruses, phishing).
- Netiquette (internet etiquette): be polite and respectful; avoid capitals ("shouting"); be clear and concise, check spelling; don't post inappropriate content; remember posts are usually public; respect othersβ privacy/copyright; don't spam or forward unnecessary mail.
- Email groups: one name refers to many addresses. Uses: send one email to many people easily; organisations group people for targeted marketing; set up meetings/video conferences; spammers buy addresses to create groups. Group addresses should be typed individually/checked so all correct recipients are included.
- Cc and Bcc: To = main recipients; Cc (carbon copy) = interested parties, visible to all recipients; Bcc (blind carbon copy) = hidden from all other recipients. For a group email, put your own address in To and the named group in Bcc, so recipients cannot see (and harvest) othersβ addresses.
- Sending attachments: limits on file size/type (e.g. executable files such as .exe, .msi, .bat, .cmd are often blocked); options: compress files (zip), or upload to a web/file-transfer service and share a link. Too many or very large emails can get a sender blacklisted by the ISP.
- Spam (junk email): sent in bulk, unsolicited (also spambots in videos/comments). Effects: uses peopleβs time; annoying; uses up internet bandwidth (slows it down); can contain viruses or phishing scams; clogs inboxes.
10.2 Effective use of the internet
Internet vs World Wide Web (WWW)
| Internet | World Wide Web |
|---|---|
| Worldwide collection of interconnected networks (INTERconnected NETworks) | A collection of multimedia web pages and documents accessed via the internet |
| Used for email, chat, file transfer (many protocols) | Uses http(s) to send hypertext; pages found by URLs; accessed with web browsers |
| The infrastructure | A service that runs on the infrastructure |
Intranet vs internet vs extranet:
- Intranet = INTernal Restricted Access NETwork: a private network inside an organisation, behind a firewall, needing user ID and password, information kept on local servers.
- Why use an intranet: safer (less risk of hacking/external threats); can block external links/websites; information specific to the company; sensitive messages stay internal; better bandwidth (faster than the internet); easy to control.
- Extranet: an intranet extended so that selected external users (customers, suppliers, partners) can access part of it with permission and different access levels.
- Internet: public, global, not policed or owned by anyone, open to everyone.
Blogs, wikis, social networking, forums
| Type | Characteristics |
|---|---|
| Blog (web log) | Personal online journal by one author; regularly updated; reverse chronological order; public; others can read (and comment) but not edit. Microblogs (short posts on social networks); b-blogs (business blogs) |
| Wiki | Web application where anyone can create, edit and delete content; many authors; keeps document history; edited via browser; easy to share large documents |
| Social networking | Members get free web space; public/private profiles; upload text, photos and video; write on walls; free instant messaging and video chat; email other members; create pages; invite friends; control who sees their data |
| Forums | Online discussion boards. Moderated forum: an administrator checks every post before it appears (removes rude, offensive, off-topic posts). Unmoderated: not policed; relies on members following rules |
- Internet service provider (ISP): company that provides access to the internet; user registers, gets an account and login details.
- Web browser: software to view web pages. Features: home page; bookmarks/favourites; history (user history); back/forward navigation; hyperlinks (blue underlined text or images); tabs; address bar; cookies (see Chapter 8/10).
- URL structure:
protocol://domain-name.domain-type/path/filename(e.g.https://www.example.co.uk/pages/index.html). Protocol = http or https; domain name = name of the website; domain type (.com, .org, .net, .gov, .co); optional country code (.uk, .us, .de, .in, .cn); path = the web page/folder; filename = item on the page. If path is omitted, the root directory of the website is used. - Search engines: two ways to find information: type the URL directly, or use a search engine (when you don't know the URL). Narrow searches by using more specific/multiple keywords, phrases in quotation marks, and logical operators (AND, OR, NOT) to reduce the number of results. Save useful pages by: bookmark/favourite; hyperlink in a document; screenshot (Print Screen); copy and paste (respect copyright).
- Advantages of the internet for finding information: up to date; vast amount; search engines fast/easy; can search from home; mostly free; multimedia content.
- Disadvantages: not regulated (information may be incorrect, biased or inappropriate); risk of accessing unsuitable sites; easy to be distracted; information overload; easy to plagiarise/copy; loss of research skills; search results may prioritise popular/paid sites so the exact page is not found quickly.
- Evaluating information found on the internet – six checks:
- Author/source: can you verify who wrote it; is it reliable?
- Accuracy: can facts be verified elsewhere; is it free of spelling/grammar errors?
- Objectivity/bias: any bias, links to biased organisations, advertising that reinforces bias?
- Currency: is it dated; when was it last reviewed and by whom?
- Coverage: does it cover all aspects, with arguments supported by references/experts or reputable organisations (e.g. universities)?
- Appearance/functionality: does the site look legitimate and do the links still work?
- Internet protocols:
- Protocol = a set of rules agreed by sender and receiver.
- HTTP (hypertext transfer protocol): rules for transferring web pages; HTTPS = secure version (S = secured), shown by padlock; uses SSL/TLS encryption.
- FTP (file transfer protocol): transfers files over a network (e.g. uploading web pages to a server, large downloads).
- SSL/TLS: encrypts data between computer and web server (uses a digital certificate to authenticate the website); used for online banking, shopping, email, cloud storage, VoIP, messaging, social networking.
- Controlling internet access: parental controls; ISPs allow the bill payer to filter/block content; mobile phone companies can block sites; schools/teachers educate users about safe use. Remember: the internet is not policed, so users cannot assume they'll be protected or that offenders will always be prosecuted; users must take precautions and be aware that content offensive to some may not be to others.
Exam tips
know differences internet vs WWW, internet vs intranet; Cc vs Bcc; how to evaluate a website; describe why moderated forums are safer; the parts of a URL are a common short-answer question.
Quick recap β Chapter 10
- Explain the difference between the internet and the World Wide Web
- List the 4 parts of an email and what each one is for
- Name 3 ways to check if a website is reliable
- Match each protocol (IP, POP, FTP, HTTP, VOIP, SSL) to what it is used for
Past Paper Exam Practice β 10 Topical Questions
View Markscheme Points
- Internet: The global physical network infrastructure consisting of connected computers, servers, cables, and routers communicating via TCP/IP.
- World Wide Web: An information system service operating on top of the internet, comprising interlinked multimedia web pages accessed via HTTP/HTTPS.
View Markscheme Points
- All email addresses entered into the CC field are visibly revealed to every message recipient.
- Addresses entered into the BCC field remain concealed from all other recipients, preserving privacy and preventing unsolicited spamming.
https://www.cie.org.uk/igcse/ict.html [3]View Markscheme Points
- Protocol:
https - Domain Name / Host:
www.cie.org.uk - File Path / Resource:
/igcse/ict.html
View Markscheme Points
- Check the top-level domain type (e.g. academic
.eduor official government.govare generally more authoritative than unverified.comsites). - Verify author credentials, organisational affiliations, and corporate reputations.
- Check the last updated date to ensure currency; cross-reference facts across independent reputable publications.
View Markscheme Points
- The internet is globally public; an intranet is a private internal network accessible strictly to authenticated organisation personnel.
- Intranets sit behind corporate firewalls hosting internal proprietary documents; internet content is hosted openly across world servers.
View Markscheme Points
- Used to reliably upload local website files (HTML, CSS, images) from a web developer's computer to a remote hosting web server.
- Supports efficient batch downloading and directory file management between client and server.
View Markscheme Points
- POP3: Downloads emails from the mail server to the local client machine and typically deletes them from the server.
- IMAP: Synchronises emails directly on the remote server, keeping folder structures identical across multiple devices (phone, laptop).
View Markscheme Points
- Significantly cheaper or free call tariffs, especially for international communications.
- Enables multimedia call features such as integrated screen-sharing, file sending, and video calling on the same line.
"computer memory") and the NOT boolean operator improves internet search efficiency. [2]View Markscheme Points
- Quotation marks: Forces the search engine to match the exact phrase with words in that precise sequence, cutting irrelevant pages.
- NOT operator: Excludes unwanted keywords from search results, filtering out unrelated topics.
View Markscheme Points
- Blog: An online journal maintained typically by a single author with posts arranged in reverse chronological order; readers can only leave comments.
- Wiki: A collaborative website where any registered user can directly edit, add, or amend article content and structural links.
Practice Questions 1 (Chapters 1β5)
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Practice Questions & Mark Scheme Answers
Cambridge IGCSE ICT 0417 (Chapters 1β5) β 100 Marks
Created by Tr. WaiLinHtet (For revision self-testing: click each question to reveal mark scheme points)Question 1 [6 marks] β Analogue and digital data
(a)(i) The data read by a sensor is (1 mark): Analogue
(a)(ii) The data read by a microprocessor is (1 mark): Digital
(b) Contrast analogue data with digital data (4 marks β any 4):
- Analogue data is continuous.
- Analogue data has an infinite number of values in a range.
- Analogue data needs high bandwidth.
- Digital data is discrete (separate values).
- Digital data is binary (0s and 1s).
- Digital data is sent at specific amplitudes (levels).
- Digital data is understood by computers.
Question 2 [4 marks] β Internal memory vs backing storage
Compare internal memory and backing storage (similarities and differences):
Similarities (max 2):
- Both store data.
- Both are devices.
Differences (max 3):
- Backing storage is permanent memory.
- Backing storage can be read and written.
- Backing storage has a larger capacity.
- Backing storage is non-volatile only.
- Backing storage is secondary memory.
- Internal memory can be reached directly by the CPU.
- Internal memory is usually faster to access.
- Internal memory is only solid state.
- Internal memory is primary memory.
Question 3 & 4 β Robots in manufacturing & Laser printers vs Plotters
Question 3: Robot programming & benefits/drawbacks
(b) One other way to program the robot (2 marks β either way below):
- Way 1: A worker guides the robot arm by hand / The worker has sensors on his arm / Each movement is recorded/saved / Each movement is stored in the computer's memory as a coordinate.
- Way 2: The robot is guided using icons on a screen / The user clicks the icons to guide the robot / Each movement is saved.
(c) Benefits and drawbacks of a robot painting cars (6 marks):
- Benefits (max 5): A robot can work where it would be harmful to a human; works continuously (all the time); running costs are low; high productivity; greater consistency (the same result every time); accurate painting.
- Drawbacks (max 3): High initial purchase cost; maintenance is expensive; causes de-skilling (workers lose skills).
Question 4 [6 marks]: Compare and contrast a laser printer with a plotter
Similarities (max 3): Both are output devices; both produce high quality output; both produce hard copy.
Differences (max 5):
- Plotters work with larger sheets of paper.
- Plotters produce higher quality drawings.
- Plotters can print on different materials.
- Plotters are multi-coloured as standard.
- Plotters use ink; laser printers use toner.
- Plotters have a bigger footprint (take more space).
- Plotters can be slower to output.
- Laser printers are page printers.
- Laser printers give out ozone, which can be a health hazard.
Question 5 [4 marks] β Role of the CPU in processing instructions
Explain the role of the CPU in processing instructions (Any 4):
- It controls the transfer of data and instructions.
- It controls the operation of the computer.
- It fetches, decodes, and executes program instructions.
- The ALU performs arithmetic and logic operations.
Question 6 & 7 β Desktops vs Magnetic Tape & 3D Printing in Medicine
Question 6 [10 marks]: Desktop computers & Magnetic tape
(a) Desktop computers (6 marks):
- Benefits (max 5): Better dissipation of heat; power consumption is not critical; less likely to be damaged (fixed in one place); less chance of being stolen; stable internet access; easy to expand or upgrade.
- Drawbacks (max 5): Less portable; large footprint (takes space); trailing lead hazards; less flexible; must be connected to mains electricity constantly.
(b) Magnetic tape for backups (4 marks):
- Benefits (max 3): Less expensive per byte; very robust technology; large data storage; fast data transfer rate.
- Drawbacks (max 3): Slow data access rate (serial access); can be affected by magnetic fields; not all devices support magnetic tape.
Question 7 [10 marks]: 3D printing in medicine
(a) Two other uses of 3D printing in medicine (2 marks): Surgical and diagnostic aids; tissue engineering; making medical tools; artificial blood vessels; customised tablets; making organs to practise on.
(b) Two benefits and two drawbacks for prosthetics (4 marks):
- Benefits: Can make a customised prosthetic; faster than building by hand; design can be saved to use again later.
- Drawbacks: High cost of 3D printers/materials; specialised training required to operate.
How tablet printing works: Digital design builds tablet layer by layer using material mixed with binding agents until complete exact dosage is made.
Question 8 & 9 β Network Fundamentals & Health and Safety
Question 8 [10 marks]: Hub, cloud and internet
- (a) Purpose of a hub (3 marks): Sends (broadcasts) data to every device connected to it; connects many computers together; acts as a repeater to strengthen signals; extends a network.
- (b) Meaning of the cloud (3 marks): A network of remote servers run by third-party providers; a collection of computing services (e.g. storage, processing power or running applications).
- (c) Characteristics of the internet (4 marks): Accessible to all; does not belong to any one organisation; anyone can create/share resources; offers information 24/7; global Wide Area Network (WAN); unlimited growth; devices communicate instantly.
Question 9 [10 marks]: Health and safety
- (a) Health problems from entering data for a long time (3 marks): Eyestrain, Repetitive Strain Injury (RSI), Back ache / neck ache, Headache.
- Solutions: Window blinds, switch to flicker-free LCD/LED screens, regular eye tests, blue lens glasses, ergonomic chairs, footrest, screen at eye level.
- (b) Physical safety issues (3 marks): Tripping over trailing leads, electrocution from spilled liquids, fire from overloaded sockets.
Question 10 & 11 β Routers vs Switches & Mobile Gaming
Question 10 [10 marks]: Routers and switches
- (a) Two other functions of a router (2 marks): Connecting networks to the internet; storing computer addresses; forwarding packets using a routing table.
- (b) How a router sends data packets (4 marks): Reads destination IP address from header; looks up IP address in routing table; sends packet along the best route to the next router/network; stores IP addresses for future use.
- (c) How a switch operates (4 marks): Connects computers into a LAN; reads receiver's MAC address; sends the data packet only to the intended recipient device.
Question 11 [5 marks]: Smartphone vs Desktop for video games
- Advantages (max 2): Portable (play anywhere).
- Disadvantages (max 5): Uses smartphone battery/processing power quickly; games interrupted by calls/messages; risk of gambling issues; health problems/eyestrain; smaller storage limits game downloads; distractions can cause real-world injury.
Question 12, 13 & 14 β Transport Safety, Zero Login, Web Conferencing
Question 12 [5 marks]: Microprocessors in transport safety
- Positive (max 5): Travel becomes safer; driver concentrates more; prevents human error; protects pedestrians; avoids accidents.
- Negative (max 5): Over-reliance on technology; costly to repair/maintain; makes vehicle more expensive; sensor misread/malfunction causes accidents; alert overload distracts driver.
Question 13 [5 marks]: Zero login and biometrics
- (a) What is meant by zero login (2 marks): Security/authentication method where data passes automatically from the first login without requiring manual typing.
- (b) Biometric methods (3 marks): Voice recognition, Fingerprint scanning, Facial recognition, Iris recognition, Hand geometry, Typing rhythm recognition.
Question 14 [5 marks]: Web-conferencing vs Video-conferencing
- Advantages: Simpler interface; less specialised equipment required (cheaper).
- Disadvantages (max 5): Cannot use physical visual aids; cannot clearly see body language; cannot verify employee attention; fewer dedicated hardware features; less personal feel; harder to control speaking turns.
Practice Question 2 β ICT Theory Assignment
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Practice Question 2: ICT Theory Assignment β Model Answers
23 Comprehensive Assignment Questions & Marking Points
Created by Tr. WaiLinHtet (Click each question box to expand the model answer)Question 1 [4 marks] – Why an SSD may be better than an HDD for a portable hard drive
Mark points (any 4):
- An SSD has no moving parts, so it is less likely to break if it is dropped or knocked.
- It reads and writes data faster.
- It uses less power, so a laptop battery lasts longer.
- It is lighter and smaller, so it is easier to carry.
- It makes no noise and makes less heat.
Question 2 [4 marks] – Characteristics and types of backing storage
(i) State two characteristics of backing storage (2 marks):
- It is non-volatile – data is kept when the power is off.
- It has a large storage capacity.
- It is not part of the main (internal) memory of the computer.
- It is used to store data and files for a long time.
(ii) Identify two other types of backing storage (2 marks):
- Memory stick / USB flash drive
- SD card
- SSD (solid state drive)
- Magnetic tape
- DVD / CD
- Cloud storage
Question 3 & 4 – Solid-state media & Benefits of touch screens
Question 3 [2 marks]: Two solid-state storage media
- Flash memory
- SD card
Question 4 [3 marks]: Benefits of using a touch screen (any 3)
- It is easy and quick to use – the user just touches the screen.
- No mouse or keyboard is needed, so it saves space.
- It is good for people who cannot type well, because they only need to touch pictures or buttons.
- It is easy to learn, so little training is needed.
Question 5 [8 marks] – OMR vs OCR (Similarities, Differences & Uses)
(a) Compare OMR with OCR (6 marks):
- Similarity: both are direct data entry methods – the data goes into the computer without typing.
- Similarity: both read data from paper using a scanner or light.
- Similarity: both are faster and more accurate than typing the data by hand.
- Difference: OMR reads marks (lines or shapes in boxes). OCR reads printed or handwritten characters (letters and numbers).
- Difference: OMR checks the position of the mark. OCR compares the shape of each character with stored shapes.
- Difference: OMR is used for forms where people tick boxes. OCR is used to turn paper documents into text that can be edited.
- Difference: OCR software is more complex and can make mistakes with poor handwriting. OMR is simpler, but can only read marks.
(b) Identify two uses of OMR (2 marks): Marking multiple-choice exam papers, voting forms / surveys / questionnaires, lottery tickets.
Question 6 & 7 – WAN vs WLAN & Benefits of QR codes
Question 6 [4 marks]: Differences between a WAN and a WLAN (any 4)
- WAN is a wide area network. WLAN is a wireless local area network.
- A WAN covers a big area, such as cities or countries. A WLAN covers a small area, such as a home, school or office.
- A WAN often uses telephone lines, cables or satellites. A WLAN uses radio waves (Wi-Fi), with no cables between devices.
- A WAN is often owned by many organisations (for example the internet). A WLAN is usually owned by one person or organisation.
- A WAN is usually slower and costs more to set up. A WLAN is cheaper and easier to set up.
Question 7 [5 marks]: Benefits of using a QR code (any 5)
- A QR code can store more data than a normal barcode.
- It can be read quickly by a smartphone camera, so no special reader is needed.
- It can be read from any angle.
- It can be read even if part of the code is damaged (it has error correction).
- It can store web links, so the user can go to a website without typing.
- It is cheap and easy to make and print.
- It reduces typing mistakes.
Question 8 to 11 – Sensors, GUI Benefits, Storage & Printer Types
Question 8 (Sensors): Light sensor, pH sensor (soil acidity), Carbon dioxide sensor.
Question 9 [4 marks]: GUI and user interfaces
- (a) Two benefits of a GUI (2 marks): User does not need to learn commands; icons, menus and windows make it easy to find and open things; user can run many programs at the same time in different windows; easy to use with a mouse or touch screen.
- (b) Two other user interfaces (2 marks): Command line interface (CLI), Dialogue (voice) interface, Gesture-based interface, Menu-driven interface.
Question 10 [2 marks]: Two storage devices: DVD RAM drive, Memory stick.
Question 11 [4 marks]: Appropriate printer matching
- This printer is an impact printer – Dot matrix
- This printer uses toner – Laser
- This printer uses an inked ribbon – Dot matrix
- This printer uses tomography – 3D
Question 12 & 13 – Tablet I/O Devices & Bluetooth Uses
Question 12 [4 marks]: Tablet computer I/O devices
- (a) Two input devices (2 marks): Touch screen, Microphone, Camera / webcam, Virtual keyboard, Sensors (e.g. gyroscope).
- (b) Two output devices (2 marks): Screen (display), Speakers, Headphone socket (headphones), Vibration motor.
Question 13: Bluetooth connection examples: Games controller, Smart TV remote, Wireless printer, Smartphone to laptop (file transfer).
Question 14 & 15 – Router Functions & Cloud vs Physical Storage
Question 14 [6 marks]: Routers
- (a) Two other functions of a router (2 marks): Connects a local network to the internet; gives IP addresses to devices on the network; can work as a firewall to protect the network; can connect devices with Wi-Fi.
- (b) How a router routes data packets (4 marks): The router receives the data packet → reads the destination IP address in the packet header → looks up the address in its routing table → finds the best (shortest or fastest) path → sends the packet to the next router or device on that path.
Question 15 [4 marks]: Cloud storage vs physical storage
- Meaning (any 2): Data stored on servers connected to the internet; owned by a company across many different places; user saves/accesses data over the internet.
- Advantages (any 2): Accessible anywhere with an internet connection; no need to buy or carry physical storage devices; storage size can be increased easily; backed up by hosting provider (safer if device is broken/lost); easy sharing and collaborative work.
Question 16 & 17 – Complex Passwords & Biometrics
Question 16 [8 marks]: Password security (Px2zY!Cg3?bd)
- Benefits (max 3): Long (12 characters, hard to crack); uses uppercase, lowercase, numbers and symbols (strong); not a dictionary word or name.
- Drawbacks (max 3): Hard to remember; user may write it down; slow to type and prone to mistyping; can still be stolen by spyware or shoulder surfing.
- (b) Two biometric methods (2 marks): Fingerprint scan, Face recognition.
Question 18, 19 & 20 – Minimising Health Risks & Automated Braking
Question 18 [6 marks]: Minimising health risks
- (a) RSI (3 marks): Take regular breaks and stretch; use a wrist rest; use an ergonomic keyboard/mouse; use voice recognition software.
- (b) Headaches (3 marks): Use an anti-glare screen/filter; ensure proper room lighting without glare; take regular breaks; adjust brightness/contrast; have regular eye tests.
Question 19 [4 marks]: Microprocessor in automated braking (any 4)
- The sensor sends the distance data to the microprocessor.
- The microprocessor compares the distance with a stored (pre-set) value.
- If the distance is too small, the microprocessor sends a signal to the brakes (actuator).
- The brakes are applied to slow down or stop the vehicle.
- This is repeated all the time (continuous monitoring), and a warning may be sent to the driver.
Question 20 [6 marks]: Reducing health risks when using a monitor (any 6)
- Use an adjustable chair with back support.
- Sit with back straight and feet flat on the floor or footrest.
- Put the top of the screen at eye level and about an arm's length away.
- Use anti-glare screens and good lighting to reduce eyestrain and headaches.
- Take regular breaks to stand up, walk and stretch.
- Look away from the screen often and focus on something far away.
- Have regular eye tests.
- Use a wrist rest and keep arms level with the desk.
Question 21, 22 & 23 – Home Automation, Hardware/Software Terms & Tablet vs Laptop
Question 21 (Home automation benefits): Control heating/cooking remotely; devices work automatically while away; comfortable living environment; saves energy and lowers bills; smartphone control from anywhere.
Question 22 [4 marks]: Terminology matching
- (a) Software the user needs to carry out a task – application software
- (b) Software the computer needs to operate – system software
- (c) The physical components of a computer – hardware
- (d) The component used to process instructions – CPU (central processing unit)
Question 23 [6 marks]: Desktop hardware & Tablet vs Laptop
- (a) Two internal items of hardware (2 marks): Motherboard, CPU (processor), RAM / ROM, Hard disk drive / SSD, Graphics card, Sound card, Power supply unit.
- (b) Tablet vs Laptop (4 marks):
- Advantage: A tablet is lighter and smaller, so easier to carry; battery usually lasts longer; switches on quickly with an easy touch screen.
- Disadvantage: No full-size physical keyboard (typing is slower); less storage and less powerful processor (cannot run big programs); fewer ports (USB) for external peripherals; smaller screen makes multi-window multitasking harder.
Practice Question 3 β ICT Theory Assignments
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Practice Question 3: ICT Theory Assignments (1 & 2) β Model Answers
IGCSE ICT β Comprehensive Exam Practice Papers
Created by Tr. WaiLinHtet (Click each question box to reveal the mark scheme points)Part 1: Assignment 1 (50 Marks)
Questions 1 to 3 – Internal Memory, Report Layouts & Laser vs Plotter
Question 1 [2 marks]: Two examples of internal memory
- RAM
- ROM
Question 2 [8 marks]: Pupil report layout & database validation
- (a) Five features of a well-designed report layout (5 marks): Clear title or heading; school logo; consistent font style and size; clear sections or boxes for pupil name, class, subjects and teacher comments; enough white space and margins; bold headings and labels; page numbers, header, footer and date; items lined up neatly (alignment).
- (b) Two validation checks for date of birth (2 marks): Format check (dd/mm/yyyy); Range check (sensible range, not in the future); Presence check; Length check (10 characters); Type check.
- (c) Type of test data acceptable (1 mark): Normal data
Question 3 [6 marks]: Compare and contrast a laser printer with a plotter
- Similarities: Both give hard copy; both are output devices connected to a computer; both can print in colour and give good quality.
- Differences: Laser printer prints on normal paper sizes (e.g. A4), while a plotter prints on very large sheets; laser printer is best for text and documents, while a plotter is best for large, detailed drawings (plans, posters, CAD).
Questions 4 to 6 – CPU Instruction Cycle, Desktops vs CAL & AI in Online Shopping
Question 4 [4 marks]: Role of the CPU in processing instructions (any 4)
- The CPU fetches the instruction from memory (RAM).
- It decodes the instruction to find out what to do.
- It executes (carries out) the instruction.
- The control unit controls the other parts of the computer and sends signals.
- The ALU does the calculations and logic (comparing).
- The result is stored or sent to an output device.
Question 5 [12 marks]: Desktop computers in a school suite & CAL
- (a) Desktops (6 marks):
- Benefits: Cheaper for same power; more powerful and easier to upgrade/repair; bigger screens and full-size keyboards; fixed in place so harder to steal or lose.
- Drawbacks: Not portable (only used in room); need power sockets and cables (take up space); no battery so stop if power fails; room layout cannot be changed easily.
- (b) What is meant by CAL (3 marks): Computer Aided Learning means using computers (and software) to help people learn; teaches topics with text, pictures and videos; often has tests and gives feedback at student's own speed.
- (c) Three features of CAL (3 marks): Interactive; uses multimedia (sound, video, animation); gives quizzes and tests with instant feedback; keeps a record of student progress; students work at own pace and repeat lessons.
Question 6 [10 marks]: AI in online shopping & Health risks
- (a) Impact of AI in online shopping (4 marks):
- Positive: Personal recommendations based on previous views/purchases; chatbots answer queries 24/7; detects fraud and stops stolen card payments.
- Negative: Collects vast personal data (privacy risk); customers may be nudged to buy more than needed.
- (b)(ii) Back problems – three ways to minimise (3 marks): Use an adjustable chair with good back support; sit with straight back (good posture); take regular breaks to stand, walk and stretch; use a footrest; adjust screen and keyboard height.
Questions 7 & 8 – Safe File Upload via Portable HDD & HTML Head Section
Question 7 [8 marks]: Portable HDD and storage media
- (a) Upload file safely, issues & avoidance (4 marks): Connect via USB; scan with anti-virus to avoid malware spreading; check file name to prevent overwriting existing files; verify file format; use 'safely remove hardware' before disconnecting to prevent file corruption.
- (b)(i) One optical storage medium (1 mark): DVD / CD / Blu-ray disc
- (b)(ii) One solid-state storage medium (1 mark): SD card / memory stick (USB flash drive) / SSD
Question 8 [2 marks]: Purpose of HTML head section
- Purpose: Holds information about the web page (such as title, styles, metadata) that is not shown directly as main visible page content.
- Element (any 1):
<title>,<meta>,<link>,<style>,<script>
Part 2: Assignment 2 (50 Marks)
Questions 1 to 4 – Web Layers, ADC/DAC, Touch Screens & Internal vs Backing Storage
Question 1 [2 marks]: Web development layers: Behaviour, Presentation (Note: content, presentation and behaviour are layers; HTML and CSS are languages).
Question 2 [4 marks]: ADC and DAC
- (a)(i) Reason for ADC: Computers only process digital data, so ADC converts analogue sensor data into digital binary.
- (a)(ii) Reason for DAC: Lets the computer control analogue actuators/devices (motors, heaters, speakers) that require analogue signals.
- (b) Device inputting into ADC: Sensor (e.g. temperature sensor) / microphone.
- (c) Device using DAC output: Speaker / headphones / motor / actuator / heater.
Question 3 [6 marks]: Touch screen compared with keyboard and mouse
- Advantages: Easy and quick to use; saves desk space; easy to learn (minimal training); great for users who cannot type well.
- Disadvantages: Typing is slower and less comfortable; screen gets dirty and can get damaged; less accurate for small items; causes arm fatigue.
Question 4 [4 marks]: Internal memory vs backing storage: Both store data and programs; internal memory is inside the computer and directly accessible by CPU, while backing storage can be removable, external and is secondary storage.
Questions 5 to 7 – Online Form Controls, Mobile Computers & RFID vs Barcode
Question 5 [14 marks]: Tawara Cars data capture form & Robot
- (a)(i) Drop down list: Model of car (saves space on form, restricts input to preset options).
- (a)(ii) Radio button: State of car (New or Used – allows selecting only one option from a mutually exclusive set).
- (a)(iii) Input mask: Date of registration (enforces correct format dd/mm/yyyy).
- (b) Programming a robot: Moving robot arm by hand/controller to record coordinates (teaching/learning by demonstration).
- (c) Car painting robot (6 marks): Works 24/7; consistent painting with less wasted paint; safer for humans (no fumes); faster production; Drawbacks: expensive initial setup/maintenance, causes unemployment, unable to handle unexpected errors.
Question 6 [2 marks]: Mobile computers: Laptop, Tablet, Smartphone.
Question 7 [6 marks]: Advantages of RFID over Barcode (any 6)
- Can be read from a distance.
- Does not need direct line of sight (no need to line up with scanner).
- Faster read rate (many tags read simultaneously).
- Tags are more robust and harder to damage or forge.
- RFID tags can be read and rewritten.
Questions 8 to 11 – HTML Body Section, Smart Home, 3D Medicine & Crossing Control
Question 8 [2 marks]: Purpose of HTML body section
- Purpose: Holds the visible content displayed on the web page.
- Elements (any 2):
<h1>,<p>,<img>,<table>,<a>,<ul>.
Question 9 [2 marks]: Microprocessor-controlled home devices: Washing machine, central heating/thermostat, microwave oven, smart TV, air conditioner, burglar alarm.
Question 10 [6 marks]: 3D printing in medicine
- (a) Uses: Dental crowns/braces, hearing aids, organ models for surgical planning, bioprinting tissue/organs.
- (b) Prosthetics:
- Benefits: Tailored exact fit for the patient; cheaper and faster than hand craftsmanship; lightweight; design easily reprinted if damaged.
- Drawbacks: High machine/material costs; printed materials may be less durable; requires skilled technical design staff; complex designs take a long time to print.
Question 11 [2 marks]: Output devices in pedestrian crossing control: Traffic lights (lamps/LEDs), buzzer/speaker, display ("WAIT" or "WALK" sign).
Practice Question 4 β Advanced Theory Revision (Chapters 6β10)
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Practice Question 4: Advanced Theory Revision β Model Answers
Cambridge IGCSE ICT 0417 (Chapters 6β10 Focus) β Comprehensive Mark Scheme
Created by Tr. WaiLinHtet (Covers Applications, Systems Life Cycle, Security & Communication)Question 1 [7 marks] β Expert Systems (Components & Diagnostics)
(a) State the five components of an expert system (5 marks):
- User interface
- Knowledge base
- Rules base
- Inference engine
- Explanation system
(b) Two medical/diagnostic uses of expert systems (2 marks): Diagnosing illnesses/diseases, suggesting treatments and prescribing medications, identifying drug interactions.
Question 2 [6 marks] β Online Booking Systems & Double-booking Prevention
Explain the process of how an online booking system prevents double-booking (4 marks):
- The user selects seats from the seating plan on the website.
- The system checks the database to confirm seat availability.
- The selected seats are temporarily locked/held (marked unavailable to other buyers).
- A timer is set; if payment is completed within the time limit, the database updates permanently.
- If payment fails or times out, the seats are released back to the available pool.
State two advantages of online booking over manual box office booking (2 marks): Available 24/7, immediate feedback on available seats, no need to travel to the venue, e-tickets save paper and postage.
Question 3 [5 marks] β Computer Simulations & Modelling
Explain why computer simulations are used instead of testing the real thing (any 5):
- Safer – tests can be run without risking human life or dangerous situations (e.g. nuclear reactors, flight simulators).
- Cheaper than building prototypes or testing real structures (e.g. car crash tests, bridges).
- Can run what-if scenarios to predict future outcomes.
- Time can be speeded up or slowed down (e.g. climate change, population growth, high-speed collisions).
- Can test conditions that are impossible to test in real life (e.g. outer space conditions, extreme weather earthquakes).
Question 4 [8 marks] β System Life Cycle: Research Methods in Analysis
Give one advantage and one disadvantage of each of the following research methods (8 marks):
- Observation:
- Advantage: Gives reliable first-hand data; analyst sees the whole system in real time.
- Disadvantage: Time-consuming; workers may change their behaviour when being watched.
- Interviews:
- Advantage: Can ask follow-up questions; allows open-ended discussion and detailed feedback.
- Disadvantage: Very time-consuming and costly; interviewees cannot remain anonymous.
- Questionnaires:
- Advantage: Cheap; quick to distribute to a large number of people; respondents can be anonymous.
- Disadvantage: Low return rate; cannot ask follow-up questions; answers are limited to preset choices.
- Examining documents:
- Advantage: Shows exactly what inputs, outputs, paper forms and data files are used.
- Disadvantage: Time-consuming; cannot see how employees actually handle edge cases.
Question 5 [6 marks] β Validation vs Verification & Test Data
(a) Distinguish between validation and verification (2 marks):
- Validation: checks that data is reasonable and conforms to specified rules.
- Verification: checks that data has been entered or transferred accurately without copying errors.
(b) Give an example of each type of test data for a month field (range 1 to 12) (3 marks):
- Normal data: 5 or 6 (valid value within range)
- Extreme data: 1 or 12 (boundaries of the range)
- Abnormal data: 0, 13, -1, or "June" (out of range or wrong type)
(c) State two methods of verification (1 mark): Visual check (screen proofreading) and Double entry.
Question 6 [6 marks] β Implementation & System Changeover Methods
(a) Compare Direct changeover with Parallel running (4 marks):
- Direct: Old system stopped and new starts immediately. Advantage: Immediate benefits, cheapest method (runs only one system). Disadvantage: Disastrous if the system fails (no backup/fallback).
- Parallel: Both systems run together for a set period. Advantage: Safe; old system acts as backup; outputs can be compared. Disadvantage: Most expensive (duplicate staff workloads and data entry).
(b) Name the best changeover method for a hospital life-critical system (2 marks):
- Method: Parallel running
- Reason: If the new system fails or experiences bugs, the old reliable system is still operating, ensuring patient safety is not compromised.
Question 7 [8 marks] β Data Security: Threats & Protections
(a) Define the difference between Phishing and Pharming (4 marks):
- Phishing: Fraudulent emails/messages sent to trick users into clicking fake links and revealing sensitive details (passwords, card numbers).
- Pharming: Malicious code installed on the computer or DNS server that redirects the user to a fake website even when the correct web address is typed in.
(b) Explain how a firewall protects a local network (4 marks):
- Monitors both incoming and outgoing network traffic.
- Checks traffic against a set of predefined security criteria/rules.
- Blocks unauthorized traffic that fails the criteria.
- Logs all network traffic and alerts the network administrator.
Question 8 [5 marks] β Encryption & SSL/TLS
(a) Explain what encryption does and does NOT do (2 marks):
- What it does: Scrambles data into unreadable cyphertext so unauthorized users cannot read it without a decryption key.
- What it does NOT do: It does not prevent hacking; it only renders intercepted or stolen data useless.
(b) Describe how SSL/TLS secures web communication (3 marks):
- Uses digital certificates issued by a trusted Certificate Authority (CA) to authenticate the website.
- Encrypts all data passed between the web browser and the web server.
- Indicated by
https://and a padlock symbol in the browser address bar.
Question 9 [6 marks] β Target Audiences & Anti-Piracy Protection
(a) Identify two design features of a website tailored for young children (2 marks): Bright attractive colours, sound/animations, more images than text, large clear fonts, simple touch/voice navigation.
(b) Describe two methods software companies use to prevent software piracy (4 marks):
- Product Key / Serial Number: Unique alphanumeric code required during installation to activate the software.
- Hardware Dongle: Physical USB key that must be plugged into the computer for the software to run.
- Online Activation: Software connects to an activation server and binds the licence to the user's account.
- Hologram stickers / Licence agreements: Visual verification on packaging and legally binding EULA before installation.
Question 10 [6 marks] β Email, Intranets & URL Breakdown
(a) Explain why Bcc should be used when sending an email to a large group of parents (2 marks):
- Hides recipients' email addresses from all other parents.
- Protects personal data privacy and prevents email addresses from being harvested by spammers.
(b) State two benefits of an Intranet over the public Internet for a bank (2 marks): More secure behind internal firewalls; sensitive documents remain internal; faster bandwidth and access; access can be restricted by user roles.
(c) Identify the parts of this URL: https://www.cambridge.org/notes/ict.html (2 marks):
https: Protocolwww.cambridge.org: Domain name (Host)/notes/: Directory pathict.html: File name
Practice Question 5 β Exam-Style Answers (Chapters 6β10)
This is for approved SrWL Learning students. Sign in with Google to unlock it β Chapter 1 is free to read now.
Practice Question 5: Exam-Style Mark Scheme Answers (Chapters 6β10)
Cambridge IGCSE ICT 0417 β Model Answers & Marking Criteria
Created by Tr. WaiLinHtet (Click each question box to reveal answers, mark distribution & sample answers)Question 1 [3 marks] – Security terms
- (a) hacking [1 mark]
- (b) spyware [1 mark]
- (c) smishing [1 mark]
Question 2 [4 marks] – Vishing
(a) What is vishing? (Any two points – 2 marks):
- A scam / fraudulent phone call or voicemail message.
- The caller pretends to be from a genuine / trusted organisation (e.g. bank, police, tax office).
- To trick the victim into giving away personal / financial details (e.g. passwords, PIN, card number) or into making a payment.
(b) Methods to prevent vishing (Any two described methods – 2 marks):
- Never give personal / financial details to an unsolicited caller over the phone.
- Hang up and call the organisation back using an official number found independently.
- Be suspicious of urgent / threatening requests; genuine organisations do not ask for full PIN / password by phone.
- Use call-blocking / caller-ID screening; do not return calls to unknown numbers left in voicemail.
- Report suspected scam calls to the organisation / authorities.
Question 3 [6 marks] – Spam emails
(a) Characteristics of spam emails (Any four – 4 marks):
- Unsolicited / not requested by the recipient.
- Sent in bulk to many recipients at once.
- Sender is unknown or the address is spoofed / fake.
- Contains advertising / promotional content (e.g. products, prizes, "too good to be true" offers).
- Generic greeting (e.g. "Dear customer") rather than the recipient's name.
- Contains suspicious links or attachments.
- Poor spelling / grammar; misleading or urgent subject line.
- Often ends up in the junk / spam folder.
(b) Ways to prevent spam emails (Any two – 2 marks):
- Use / enable a spam filter.
- Do not give out your email address on public websites / use a separate email address for sign-ups.
- Do not reply to, open or click links / attachments in spam; do not click "unsubscribe" on unknown senders.
- Block the sender / mark the message as spam.
- Use an email address that is hard to guess / disposable address.
Question 4 [4 marks] – Personal data
Example 1 (2 marks):
- Example (1 mark): Full name / home address / date of birth / telephone number / email address / gender / ethnicity / religion / medical details / parent or guardian contact details / photograph / student ID number / fingerprint.
- Explanation (1 mark): It can be used to identify a living person (on its own or combined with other data) / it is private and could be misused (e.g. identity theft, stalking, fraud) if it fell into the wrong hands.
Example 2 (2 marks):
- A different valid example (1 mark) with a different valid explanation (1 mark), as above.
*Note: Do not accept biometric data if already given in the question. Do not accept a bare "age" or "class". The explanation must link to identifying a person or to privacy/misuse, and must match the example given.
Question 5 [4 marks] – Cloud storage
Explanation of cloud storage (Any two – 2 marks):
- Data is stored on remote servers / online (not on the userβs own device).
- Accessed / uploaded via the internet.
- Servers are owned and maintained by a third-party company (the hosting provider); often held in data centres in different locations.
Advantages compared to physical storage (Any two – 2 marks):
- Data can be accessed from anywhere / on any device with an internet connection.
- Storage capacity can easily be increased / decreased; no need to buy extra hardware (pay only for what you use).
- Data is automatically backed up / easier to recover; lower risk of loss through theft, fire or damage to a local device.
- Files can be shared easily; several users can collaborate on the same file at once.
- Provider handles maintenance, updates and security.
Question 6 [5 marks] – File Transfer Protocol (FTP)
(a) What is FTP? (Any two points – 2 marks):
- FTP stands for File Transfer Protocol.
- A network protocol / set of rules used to transfer files between computers over a network / the internet.
- For example, uploading files from a local computer to a web server (or downloading them).
(b) Steps to upload/publish a website using FTP (Any three steps in order – 3 marks):
- Open FTP client software and connect to the web server by entering the host address (FTP address), username and password.
- Locate / select the website files (HTML pages, CSS, images) on the local computer.
- Upload / transfer the files to the correct folder on the web server (e.g. public_html / www / root folder), keeping the same folder structure and including the home page (e.g. index.html).
- Check the upload succeeded and test the site by entering its URL in a web browser; the website is now published / publicly accessible.
Question 7 [6 marks] – Hacking
(a) Definition and effects of hacking (3 marks):
- Definition (1 mark): Hacking is gaining unauthorised / illegal access to a computer system or the data on it.
- Effects (Any two – 2 marks):
- Data can be deleted / corrupted / altered.
- Data can be copied / stolen and sold or used for identity theft / fraud.
- Malware / viruses / spyware can be installed.
- Settings can be changed / passwords changed so legitimate users are locked out; system may crash.
(b) Preventative measures (Any three described measures – 3 marks):
- Use strong passwords (long, mixed characters) and change them regularly.
- Install and configure a firewall to block unauthorised access to the network.
- Use up-to-date anti-malware / anti-spyware software.
- Encrypt the data so that it cannot be understood if it is accessed.
- Use two-factor / biometric authentication or limit login attempts.
- Set user access levels / rights so users can only reach the data they need.
- Keep software / operating system updated with security patches.
Question 8 [6 marks] – Physical safety when using IT equipment (Evaluation)
Indicative content – Risks (Evaluation of own use):
- Back and neck pain from poor posture / sitting for long periods.
- Repetitive strain injury (RSI) in wrists / fingers from prolonged typing and mouse use.
- Eye strain / headaches from screen glare, poor lighting or staring at a screen too long.
- Tripping over trailing cables.
- Electric shock / fire from overloaded sockets, damaged cables or spilled drinks on equipment.
- Equipment falling / injuring someone (e.g. heavy monitor, laptop on a badly placed desk).
Indicative content – Strategies to minimise risks:
- Use an adjustable ergonomic chair with back support; sit upright with feet flat on the floor.
- Position the monitor at eye level and at armβs length; use an anti-glare screen and good lighting.
- Take regular breaks (e.g. every 30β60 minutes) and do stretching / eye exercises.
- Use a wrist rest / ergonomic keyboard and mouse; keep wrists straight.
- Use cable ties, trunking or cable covers so cables are tidy and out of walkways.
- Do not overload sockets; use surge protectors / RCD; have equipment regularly checked (PAT testing).
- Keep food and drink away from equipment; keep a suitable fire extinguisher (COβ) nearby.
- Place equipment on stable surfaces / ensure good ventilation.
- Level 3 (5β6 marks): Balanced evaluation of candidateβs own use, with several relevant risks each linked to a clear strategy.
- Level 2 (3β4 marks): Some risks and strategies described, but links are partial.
- Level 1 (1β2 marks): A few basic points listed with little or no description.
Sample Answer:
"I use a laptop for several hours each day, often on my bed or sofa, which gives me poor posture and risks back and neck pain. I also type a lot, so I could develop RSI, and long screen sessions cause eye strain. Charging cables trail across my bedroom floor, which is a tripping hazard, and I sometimes keep a drink beside my laptop, risking a spill and electric shock. To reduce these risks I will use the laptop at a desk with an adjustable chair, raise the screen to eye level and use a separate keyboard and mouse. I will take a break every 30 minutes to stretch and rest my eyes, keep cables tidy with ties, avoid overloading the socket, and keep drinks well away from my equipment."
Question 9 [6 marks] – Streaming vs downloading / physical copies
Advantages of streaming:
- Content plays almost immediately β no need to wait for a full download.
- No need to store large files, so it saves storage space on the device.
- Access to a huge library of films / music, often for a low monthly subscription (cheaper than buying each item).
- Available on many devices and in many places with an internet connection; new releases are added regularly.
- No physical copy to lose, scratch or damage; lower risk of downloading illegal / infected files.
Disadvantages of streaming:
- Requires a fast, stable internet connection β otherwise buffering / poor quality.
- Uses a lot of data, which can be costly on limited data plans.
- The user does not own the content β it can be removed or unavailable if the subscription ends.
- Ongoing subscription fees; some content is restricted by region / licensing.
- Cannot be used offline (unless downloaded within the app); quality depends on bandwidth.
- Level 3 (5β6 marks): Both advantages and disadvantages described with development in a balanced answer.
- Level 2 (3β4 marks): Both given but limited description, or well-described one-sided answer.
- Level 1 (1β2 marks): Brief points only.
Sample Answer:
"Streaming lets a user start watching or listening straight away without waiting for a download, and because nothing has to be stored, it saves space on the device. A subscription gives access to a very large library for a fixed monthly fee, and there is no physical disc to scratch or lose. However, streaming needs a fast and reliable internet connection β if the connection is poor the video buffers or drops in quality β and it can use up a lot of data. The user also never owns the files, so films can be removed from the service, and access stops if the subscription is cancelled."
Question 10 [6 marks] – Firewall and data protection principles
(a) Purpose of a firewall (Any two – 2 marks):
- A firewall is software or hardware that sits between a computer / network and the internet.
- It monitors / examines incoming and outgoing network traffic (data packets) against a set of rules / criteria.
- It blocks unauthorised / suspicious traffic and allows genuine traffic through, helping to prevent hacking and malware.
(b) Principles of data protection (Any four – 4 marks):
- Data must be processed fairly and lawfully.
- Data must be collected / used only for specified, lawful purposes (not used for anything else).
- Data must be adequate, relevant and not excessive for its purpose.
- Data must be accurate and kept up to date.
- Data must not be kept for longer than necessary.
- Data must be processed in line with the data subjectβs rights (e.g. to see and correct their data).
- Data must be kept secure against unauthorised access, loss or damage.
- Data must not be transferred to countries without adequate data protection.
Test your knowledge across all chapters (1β10) with timer and instant submission.
Start Quiz →